Datamax-O'Neil S2000i User Guide - Manual (Page 19)

15
7 Printer Control Codes and Resident Fonts
Character Hex/Dec CONTROL ACTION
EOT 04/04 End Of Text
BS 08/08 Back Space
HT 09/09 Horizontal Tab
LF 0A/10 Line Feed
VT 0B/11 Vertical Tab
FF 0C/12 Form Feed
CR 0D/13 Carriage Return
SO 0E/14 Shift Out – Select double wide print
SI 0F/15 Shift In – Clear double wide print
XON 11/17 Transmitter On.
AUXON 12/18 Printer on.
XOFF 13/19 Printer receiver is off
NORM 14/20 Return to default 42 column mode
AUXOFF 15/21 Printer to Host: printer is off
CANCEL 18/24 Cancel and reset printer buffer. Default to Standard font.
ESC 1B/27 Escape
EXTEND 1C/28 Extended print
EXTEND OFF 1D/29 Extended print off/Normal print
Status All Report Buffer, power timer and battery status
Status buffer Report number of characters received in buffer
Printer Command Strings Printer Function
ESC+F+1 (default) Standard ASCII and International character set
ESC+F+2 Hebrew ASCII and Hebrew character set
ESC+F+3 IBM PC ASCII and IBM PC character set
ESC+1+Null SELECT 1 DOT SPACING
ESC+0+Null SELECT 3 DOT SPACING (default)
ESC – G Select 6-bit graphic print mode
The graphic character set From character '?'(3FH) to TILDA (7EH), CR & LF
ESC - ‘A’ Select Text Print Mode. Cancel Graphic mode.
ESC – ‘P’ – alpa Time and date print and Format control
ESC – ‘M’ - ‘000’ - cr Disable the power down timer
ESC - ‘M’ - ‘nn0’ - cr sets the power down timer to nn seconds
ESC – ‘M’ - ‘C’ Reset Auto power down to 20 seconds
ESC – ‘M’ - ‘nnm’ - cr Select optional Magnetic Card reader
^B Request printer Status Report:
Report Format
Print buffer:
<4 ASCII digits>
Battery Voltage: <4 ASCII digits>
Magnetic card reader: <4 ASCII digits>