Datamax-O'Neil OC-2 SERIES User Guide - Manual (Page 17)

U
SING THE CONTROL PANEL
13
Battery Status LED
Battery
Status LED
Description Action
Red (solid):
The battery
has less than
5% power. • If A/C power is not plugged
in, the printer will soon turn
off.
• Charge the battery.
• If A/C power is plugged in,
the LED flashes and
charging is in progress.
• None. Wait for the
charge LED to turn
green.
Orange (solid):
The battery
has less than
25% power. • If A/C power is not plugged
in, indicates the battery
charge is low.
• Charge the battery.
• If A/C power is plugged in,
the LED flashes and
charging is in progress.
• None. Wait for the
charge LED to turn
green
Green (solid):
The battery is
near, or at, full
capacity. • If A/C power is not plugged
in, the battery is well
charged.
None.
• If A/C power is plugged in,
the LED is solid and
charging is complete.
None.
Red to orange
flash - fast Battery voltage is too high. Replace battery.
Orange flash -
slow Charge has timed out. Restart battery charge
(battery may be bad).
Orange flash -
fast Internal code error. Remove the battery,
then re-connect A/C
power.