beautypg.com

Datamax-O'Neil MP Compact4_MP Compact4 Mobile Mark II Operators Manual User Manual

Page 33

background image

B-2


3. Next select the Network Tab. Click

on the Network Report Button. This

report will display the printers

current IP address as well as other
current network settings.

If the IP address shown is valid for
you network. Then this IP can be

used for the windows driver setup.


If the IP address shown is not valid

for your network then a static IP

address will need to be assigned.


For static IP setup only

1. Click on the Wired Ethernet

Configuration button

2. Set

DHCP to Disabled, then set

the following with appropriate
values for your network:

Printer IP Address

Printer Subnet Mask
Printer Gateway

3. Send the settings to the printer

using the Configure Printer toolbar

button.

4. The printer will reset and will

connect to your network using the

IP you provided.


Once the previous steps have been successfully completed you may now use the IP Address to install a printer
driver, and start printing from your Windows applications; see Section 3.2.