Datamax-O'Neil APEX Series Programmer’s Manual User Manual
Page 51
45
Display Tables Information
ESC D I CR
Same description as the command directly above. This command is for Legacy printer’s compatibility.
Escape Sequence: ESC D
I
CR
Hexadecimal:
1B
44
49
0D
Decimal:
27 68 73 13
Disable Font Download Mode
ESC F X
This command will disable the font download mode and put the printer in ready print mode.
Escape Sequence: ESC F
X
Hexadecimal:
1B
46
58
Decimal:
27 70 88
Display Font Download Current Settings
ESC F S m t k f CR
This command will instruct the printer to display the current font download settings. The printer will send the following
string to the host:
Esc-‘F’-‘S’ m t k f
Parameters
m
‘0’=standard response, ‘1’ =response with diagnostics message (default)
t
Font File type. t = ‘0’. BDF formatted file (default). t= ‘1’ through ‘9’ reserved
k
Font Table: column value. = ‘0’ through ‘9’
f
Font Table: row value. f = ‘0’ through ‘9’
Set Font Download Parameter
ESC F P m t k f CR
This command sets the font download parameters such as for the row and column of the font memory table. The
command structure is detailed below.
Parameters
m
‘0’=standard response, ‘1’ =response with diagnostics message (default)
t
Font File Type. t = ‘0’. BDF formatted file (default). t= ‘1’ through ‘9’ reserved
k
Font Table: column value. = ‘0’ through ‘9’
f
Font Table: row value. f = ‘0’ through ‘9’