Datamax-O'Neil APEX Series Programmer’s Manual - Manual (Page 14)

8
Horizontal Position
Carriage Return CR
This command prints the input buffer information and advances the paper to the next line. If the printer buffer is empty a line is
advanced.
Control Code: CR
Hexadecimal: 0D
Decimal
13
Backspace BS
This command removes the previous character from the print buffer.
Control Code: BS
Hexadecimal: 08
Decimal: 8
Horizontal Tab HT
This command advances the cursor by the number of dots specified in the Horizontal Margins command
Control Code: HT
Hexadecimal: 09
Decimal: 9
Set Horizontal Tab Width ESC T H n
This command sets the Horizontal Tab (HT) value. The parameter n has values between 0 and 255 with a default value of 100
dots..
Example: The following escape sequence sets the horizontal tab width to 50 dots.
Escape Sequence: ESC T H 2
Hexadecimal: 1B 54 48 32
Decimal: 27 84 72 50