Datamax-O'Neil VMP SERIES AN-15 (Line Printer and Easy Print Modes) - Manual (Page 4)

THREE LETTER CONFIGURATION COMMANDS (SELF-COMPLETING - NO {COMMIT})
Note: Details of Parameters for each command is given in the section for that command
COMMAND MEANING
ORIGINAL
MF2/MF3/2t/4t
RADIO READY
2t/3l/4t
CBT Configure Blue Tooth X
CIB Configure Infrared BAUD X
CIN Configure IrDA Name X
CIP Configure Infrared Protocol X
CIV Configure X
CLP Configure Label Printing X
CMR Configure Magnetic Card Reader
X
(if card reader)
X
(if card reader)
CSR Configure Smart Card Reader
X
(if card reader)
X
(if card reader)
CTC Configure TCP/IP and 802.11 X
NORESET
This command can be sent when you are configuring several
areas requiring several different configuration commands. It
prevents the printer from writing to flash and restarting
automatically – instead it will wait until the COMMIT command
is received.
X
THREE LETTER CONFIGURATION COMMANDS (SELF-COMPLETING - NO {COMMIT})
Note: The following commands act on the entire configuration data set and require no individual parameters or data
COMMAND MEANING
ORIGINAL
MF2/MF3/2t/4t
RADIO READY
2t/3l/4t
CDV
Configure Default Values
[Reverts to Non-User-Specific Default Values at time of
Manufacture for Configuration Parameters] X
RDV
Restore Default Values
[Restores all configuration parameters to those stored by the
SDV command] X
SDV
Store Default Values
[Stores an image of the current parameter values in separate
area of flash – see also RDV to Restore the parameters to
those values stored by SDV]
X