Analog Way Smart Vu LE User Manual

Page 4

2/ Press the CUT button if you wish to have a cut transition when

you go live with your layer, or press the FADE button if you wish your

layer to fade. In the Menu section, set the duration of the fade if a

fade transition is what you have chosen.

3/ Press the TAKE button to view the results on screen.

It is possible to make a “snapshot” of a live source by pressing the

FREEZE button at any stage. The

SmartVu LE

will record a still

frame from the live image on your output.

Using Presets

It is possible to build up to 4 presets from any layer, then re-use it at

any moment.

To create and use a Preset, proceed as follows:

1/ In the Input Selection section, press the source button you wish to

add a transition effect to. Adjust all the desired image and/or transition

effects of your layer.

2/ Press the PRESET button, or, in the Menu section, navigate to the

Preset menu and press ENTER.

3/ In the Menu section, select an empty preset to store your layer and

its effects into, then press ENTER.

4/ To recall a preset, press the PRESET button, then one of the 4

preset buttons (Input selection) and press TAKE.

Version: 3.0 - 02/02/2012

Code: 140110

Warranty

Going further with the SVU200

This Analog Way product has a 3 year warranty on parts and labor,

back to factory. This warranty does not include faults resulting from

user negligence, special modifications, electrical surges, mishandling

(drop/crush), and/or any other damage caused by misuse.

For complete details and operation procedures, please refer to the

Smart Vu LE

User Manual and our website for further information:

www.analogway.com