Analog Way Smart Vu LE - Manual (Page 2)

Setting up the Smar tVu LE
WORKING WITH THE SMART VU LE
Connect all of your sources (PC, video camera, streaming server, DVD player...) to the appropriate input
connectors at the rear of the unit (see “The SmartVu LE rear panel” into the User Manual).
Connect your main output to the video projector for audience viewing, and your preview output to a monitor
for preview purposes (see “Connecting the SmartVu LE ”, into the User Manual). Turn all input and output
devices on.
Connect the supplied AC power cord to the unit, then connect the other end of the cord to a grounded AC
outlet. Power up the SmartVu LE by pressing the I/0 button at the rear of the unit, and wait for the menu to
run its startup sequence. The unit is on and ready to function when the System Menu appears on your VFD
screen.
The following setup is an example of a typical Smart Vu LE configuration for an event or roadshow, but can
of course be modified according to your specific needs: