AT&T 2462 - Manual (Page 39)

Connect with the Answering System
You can access many features of this system remotely from a touch tone
phone.
1 Dial one of your telephone numbers.
2 When the system answers, enter your Security Code (preset to
5000). You will hear a series of beeps and the system announces
how many new messages you have in each mailbox.
3 After the announcement, enter a remote command (see “Remote
Access Commands”).
4 The system automatically disconnects if 15 seconds pass with no
command entry.
Voice Menu
The system has voice prompts to help you with remote operation. Press
5 to hear the menu while remotely connected to the answering system.
Remote Access Commands
Function Command:
Play messages in Press
1, then the mailbox
a mailbox number (
1 or 2). The system plays all
messages in the selected mailbox.
Play only new messages Press
2, then the mailbox number
in a mailbox (
1 or 2). The system plays only new
messages in the selected mailbox.
Repeat a message Press
4 while message is playing;
each press backs up another message.
Skip a message Press
6 while message is playing;
each press advances another message.
Stop Press
# .
Save messages Hang up.
Delete the current message Press
3 while message is playing.
Delete all messages in Press
3 , then the mailbox number.
a mailbox After the system prompt, press
3 again
to confirm decision to delete all
messages in the mailbox.
36
ANSWERING SYSTEM OPERATION
AT TOUCH TONE PHONE
2462_00_1 ATT CIB 1/28 1/28/02 9:52 AM Page 36