Feature settings – AT&T 2462 User Manual
Page 15
12
FEATURE SETTINGS
Number of Rings
Choose how many times the phone will ring before the system answers an
incoming call. You must set this feature for each line. If you set this
feature to
TOLL SAVER (TS), the system answers after two rings when you
have new messages and after four rings when you have no new messages.
1
Press or to
select
# OF RINGS:, then press
. The screen displays the current setting.
2
Press
or
to change the number of rings.
3
Press
to confirm your selection.
Day of the Week
Changing this setting for either mailbox changes the day of the week
for both mailboxes.
1
Press
or
to select the day displayed, then press
. The screen displays the list of days.
2
Press
or
to scroll through the list.
3
When the desired day is highlighted, press
to confirm
your selection.
Time
Changing this setting for either mailbox changes the time for both
mailboxes.
1
Press
or
to select the time displayed, then press
. The screen displays
SETTING TIME and the current
setting.
2
Enter the new time with the keypad. You can use
or
to move the cursor between digits.
3
To change between AM or PM, move the cursor under the
A or P.
Press
2 or * to set to A. Press 7 or # to set to P.
4
Press
to store the displayed time.
Turn Audible Alert On/Off
When Audible Alert is turned on, the base beeps once every 10 seconds
when new messages have been received. This feature can be changed at
either mailbox and resets for both mailboxes. The system is pre-set to
OFF
1
Press or to
select
AUD ALERT, then press
.
2
Select the desired setting (
ON or OFF), then press
to confirm your selection.
OK
SET
SAVE
SET
OK
SET
SAVE
+
-
SET
2462_00_1 ATT CIB 1/28 1/28/02 9:52 AM Page 12