AT&T 2462 - Manual (Page 11)

8
7 Follow the directions for each feature as described in
“Telephone Features”.
8 Press
O(CLEAR) on the handset or
on the base to return
to the Setup menu
— OR —
Press and hold
O(CLEAR) on the handset or
on the base
to return to the idle screen.
Telephone Features
You can set each feature independently at the base or handset. Some
features apply to only one location, as noted.
Feature Directions
RINGERS
Volume
You can adjust the ringer volume for Line 1 and the
Intercom or Line 2 to four settings or off.
Use the softkeys to adjust the volume down or up,
or to turn the ringer off. You will hear a volume
sample each time you change the setting, and the
screen displays the volume level. Press
to save.
Melody You can choose from six different ringer tones for
Line 1 and Line 2.
Use the softkeys to hear the different ringers. Press
to save the last ringer tone heard.
Call Screening Turn this feature on to hear messages as they are left
(Base only) in either answering system mailbox.
Use the softkeys to select ON or OFF, then press
.
Low Batt Tone If you turn this feature on, the handset sounds a tone
(Handset only) to indicate the battery power is low.
Use the softkeys to select OFF or ON, then press
.
NOTE: Press
O(CLEAR) on the handset or
on the base at any
time during feature setup to return to the previous screen.
OK
OK
SAVE
OK
FEATURE SETTINGS
2462_00_1 ATT CIB 1/28 1/28/02 9:52 AM Page 8