Acer Altos G610 - Manual (Page 118)

4 BIOS Setup utility 108
IPMI BIOS
Version Shows the version of IPMI BIOS
BMC
Firmware
Version Specifies the version of BaseBoard
Management Controller (BMC) Firmware
System Event
Logging Enables or disables the event logging
function of your system Enabled
Disabled
Clear Event
Log Area Clears the event log whenever the event
log area is full Disabled
Enabled
Existing Event
Log Number Number of events currently located in the
event log area
Remaining
Event Log
Number Number of spaces that are still available
for logging system events
View Event
Logs Opens the system event log file for viewing
Event Control
BIOS POST BIOS checks the bad processors and
memory modules during POST. When this
parameter is enabled, BIOS will stop POST
operation whenever it finds a bad
processor or memory. Otherwise, if
disabled the system will continue running. Enabled
Disabled
Memory ECC ECC (error correcting code) tests the
accuracy of data as it passes in and out of
memory. This parameter enables or
disables the monitoring of this function. Enabled
Disabled
PCI Devices PCI (Peripheral Component Interconnect) is
a 32-bit bus that supports a 64-bit
extension for new processors, such as
Pentium processors. It can run at clock
speeds of 33 or 66 MHz. This parameter
monitors the activity of this bus when set
to Enabled. Enabled
Disabled
Parameter Description Option
AA G610.book Page 108 Monday, October 22, 2001 9:46 AM