CEMB USA K10_2 (E) User Manual

Page 3

I 0581 -

533

990

860

1- GENERAL

1.1 - General safety recommendations

▪ The wheel balancing machine should only be used by duly authorized and trained personnel.
▪ The wheel balancing machine should not be used for purposes other than those described in the instruction

manual.

▪ Under no way should the wheel balancing machine be modifi ed except for those modifi cations made explici-

tly by the manufacturer.

▪ Never remove the safety devices. Any work on the machine should only be carried out by specialist person-

nel.

▪ Avoid using strong jets of compressed air for cleaning.
▪ Use alcohol to clean plastic panels or shelves (AVOID LIQUIDS CONTAINING SOLVENTS).
▪ Before starting the wheel balancing cycle, make sure that the wheel is securely locked on the adapter.
▪ The machine operator should avoid wearing clothes with fl apping edges. Make sure that unauthorized per-

sonnel do not approach the machine during the work cycle.

▪ Avoid placing objects inside the base as they could impair the correct operation of the machine.
▪ Correct head disassembly (also see exploded drawings): the weight-holder head is anchored to the bed on

the front side with snap-fi tting clips; on the rear side, it is secured by a safety screw accessed by removing
the control panel.

1.1.1 - Standard safety devices

▪ Stop push button for stopping the wheel under emergency conditions.
▪ The wheel guard is not compulsory since the balancing speed is less than 100 min

-1.

1.2 - Field of application

The machine is designed for balancing wheels of car, light commercial vehicles or motorcycle, weighing less than 75
Kg. It can be operated in the temperature range of 0° to + 45° C.
The following functions are provided: Double operator; ALUS; SPLIT; Unbalance optimization; Self diagnostics;
Self-calibration.

1.3 - Overall dimensions