CEMB USA K9 (B) - Manual (Page 6)

I 0672 - 6
15
7
10
8
9
12
11
13
14
6
4 3
16
17
18
1
5
2
8
GB
4 - CONTROLS AND COMPONENTS
4.1 - CONTROL PANEL AND DISPLAY ►
1-2 Digital readouts, AMOUNT OF UNBALANCE, inside/outside
3-4 Digital readouts, POSITION OF UNBALANCE, inside/outside
5 Inside correction mode selection button
6 Indicators, correction mode selected
7 Outside correction mode selection button
8 Special function indicators
9 Manual WIDTH/DISTANCE/DIAMETER setting buttons and MENU selection
10 Push button, FUNCTION MENU
11 Balancing cycle stop button
12 Balancing cycle start button
13 Position repeater push button
14 Push button, SPLIT (unbalance resolution)
15 MENU selection confi rmation pushbutton
16 Push button, unbalance reading < 5 g (.25 oz)
17 Unbalance optimization selection pushbutton
18 Grams/ounces selection pushbutton
O
N
▪
LY USE THE FINGERS TO PRESS THE PUSH BUTTONS
.
N EVER USE THE COUNTERWEIGHT PINCERS OR OTHER POINTED OBJECTS . ▪
4.2 - ► AUTOMATIC DISTANCE AND DIAMETER GAUGE
Allows measuring the distance from the machine and the diameter at the point of application of the counterweight.
The same gauge allows proper positioning of the counterweights inside using the specifi c function
.