Castle TSM-21 Diagnostic Manual - Manual (Page 55)

Castle Inc TSM-21 Diagnostic Manual v2 Page 55 of 63
6 Appendix A – Machine Safety 21.80
It is your responsibility to ensure that you understand this procedure before performing the
following tasks. Contact the document author if you have any questions about this procedure.
6.1 General Safety Rules for Machine Operators
 Read the Operator Manual carefully before operating this machine. It contains
important information and warnings concerning the use and operation of this
machine. Improper use of this machine may result in serious injury and/or damage to
property.
 Use Caution when using this machine. Only trained operators should use this
machine, or be within ten feet when the machine is in operation.
 Always wear protective eyewear and hearing protection when operating or standing
near an operating machine.
 Be certain the machine is properly grounded before operating it.
 Operate this machine only when the doors and covers are in their proper position.
 Keep all body parts away from the moving parts of this machine whether it is in
operation or at rest.
 Do not place hands or fingers between the work piece and the clamp or near the
cutters at any time.
 Do not wear gloves or loose clothing (such as sweater, jackets, or jewelry) when
operating or standing near an operating machine.
 Keep both hands on the work piece when initiating a Pocket Cycle on this machine.
 Before attempting adjustments, maintenance, or repair, STOP this machine and
disconnect it from the compressed air supply and AC mains power. Wait for all motion