PA Industries Magnum Servo Roll Feed SRF-M12/18/24/32/36/48 - Installation and Operating Instructions - Manual (Page 18)

18
CASCADE WITH OPTIONAL ENCODER
10. CASCADE WITH ENCODER PARTS LIST AND DIAGRAM
1 D17443 2 BRACKET, CASCADE SIDE
2 B17444-XX 1 ROD, AXLE-UPPER ROLL
3 A16548-XX 3 ROD, AXLE-LOWER ROLLS
4 A17093 2 CLAMP, GUIDE BAR
5 A17091-XX 2 GUIDE BAR, EDGE ROLLERS
6 C16542-XX 4 ROLLER, CONVEYOR
7 A17445-XX 4 COVER, ROLLER
8 M16522-02 2 ASSEMBLY, EDGE GUIDE ROLL
9 P12416-27 2 HANDLE, 12mm TAP
10 SUPPLIES 14 WASHER, 1/2” ID x 1.06 OD x .09 THK.
11 SUPPLIES 14 NUT, M12 X 1.75 (DIN #934), PLATED
12 SUPPLIES 2 SCREW, M6 X 1.0 X 30mm LONG,
SHCS, BLACK OXIDE
13 SUPPLIES 6 SCREW, M10 X 1.5 X 25mm LONG,
SHCS, BLACK OXIDE
ITEM PART NO. QTY DESCRIPTION
14 M16967 1 STRIP ENCODER
15 C17183-XX 1 PLATE, ENCODER
16 C17185-XX 1 PLATE, SUPPORT
17 12110-20 1 VALVE, SELECTOR; 4-WAY
18 A16987 1 PIPE PLUG, DRILLED
19 SUPPLIES 2 SCREW, M8 X 1.25 X 60mm LONG,
BHCS, BLACK OXIDE
20 SUPPLIES 2 SCREW, 10-32 X 1-1/2 BHCS
BLACK OXIDE
21 16735-02 2 HANDLE, WIDTH GUIDE ADJUST.
Note: Part Numbers with “XX” designation are dependent on the
Model width. Use numbers 12, 18, 24, 32, 36, or 48 respectively
for Models M12, M18, M24, M32, M36, and M48.
ITEM PART NO. QTY DESCRIPTION
DRAWING 17442