BARSKA Red Dot - Manual (Page 2)

8/11 BC199
BARSKA® Optics, as manufacturer, warrants this new precision optical product to be free of original
defects in materials and/or workmanship for the length of time specified by this warranty. This warranty
does not include damage caused by abuse, improper handling, installation, maintenance, normal
wear-and-tear, unauthorized repairs or modifications and tampering in anyway.
This warranty is limited to the original purchaser and is not transferable. This warranty applies only to
products purchased in the United States of America and Canada.
In the event of a defect within 30 days, the consumer must return the defective unit to the BARSKA
dealer (the place of purchase) at his/her own expense.
Beyond 30 days, BARSKA products should be sent to the following address for warranty repairs.
Products must be packed carefully and sturdily to prevent damage in transit, and returned freight
prepaid to:
BARSKA® OPTICS
1721 WRIGHT AVE.
LA VERNE, CA 91750
For additional and updated information please visit our website at www.barska.com
Please email [email protected] or call 1.888.666.6769 for Return Merchandise Number (RMA#)
before any returns.
NOTE: All merchandise received without a valid RMA # will be returned to shipper at his/her own
expense.
Please include all of the following when returning BARSKA products for service and/or replacement:
1. Please write your complete details (Name, Address, Telephone #, E-mail address, RMA#, etc.)
2. Purchase receipt or Proof of Purchase. (Original/Copy)
3. A brief explanation of the defect.
4. A Check/Money Order of $15.00 to cover inspection, shipping and handling.
*Please allow 6-8 weeks for delivery.
This product will either be replaced or repaired at the discretion of the warrantor. If it's a discontinued
item, we will replace the product with an equivalent product. Should the repair not be covered by this
warranty, an estimate will be sent for your approval. Non-warranty repairs or refurbishing of your optical
products are always provided at a reasonable cost.
BARSKA® Optics shall not be liable for any consequential, incidental and/or contingent damages
whatsoever. We will not pay shipping, insurance or transportation charges from you to us, or any import
fees, duties and or taxes. This warranty supersedes all previous BARSKA® Optics warranties.
ONE YEAR LIMITED WARRANTY
RED DOTS
©2011 BARSKA ® | La Verne, CA 91750 | USA | www.barska.com
ZEROING
With the scope mounted, rest the gun on a solid support. Remove the windage and elevation adjustment
screw caps from the scope. Sight along the barrel and aim at a target 50 to 100 yards away. Sight through your
Red-Dot scope and use the windage and elevation adjustments to align the lighted reticle with the target as
seen along the barrel.
NOTE: Each click of adjustment changes bullet strike at a shooting distance of 100 yards by the amount
indicated by the following formula: Divide the distance (number of yards) by 100. The resulting number, when
multiplied by the click value stated on the windage and elevation dial plates, will yield the actual click value of
the scope at the shooting distance.
FORMULA:Distance / 100 = N N x Stated Click Value = Actual Click Value
RED DOT MANUAL