BARSKA AU11069 Red Laser Pistol/Rifle Sight with Picatinny Compact Weaver Rail - Manual

Quick Installation
1. Insert laser to mount and attach to firearm with
large allen wrench. Keep adjustment screws
aligned vertically and horizontally, then tighten
securely in place.
2. To sight in your laser to your firearm turn laser
on, use smaller allen wrench to adjust windage
and elevation (left and right, up and down) as
needed.
3. Laser needs to be zeroed in at one preset
distance, with a max range of 500yds.
Red Laser Pistol/Rifle Sight
with Tactical Weaver Style Detachable Mount
© 2010 BARSKA
®
| La Verne, CA 91750 | USA
w w w . b a r s k a . c o m
BC147
WARNING :
AVOID EXPOSURE
LASER RADIATION IS EMITTED
FROM THIS APERTURE
DANGER
Red Laser Pistol / Rifle Sight
Model: AU11069
Made In China
BARSKA Optics
1721 Wright Ave,
La Verne CA, 91750 USA
This product complies with 21 CFR
chapter 1, subchapter L.
LASER RADIATION
AVOID DIRECT EYE EXPOSURE
Max Output<5mW
WAVELENGTH 635nm-655nm
Class IIIA Laser Product
FDA NO.:0710587-000
WARNING: BE CERTAIN THAT YOUR FIREARM IS NOT LOADED AND
POINTED AWAY FROM YOU IN A SAFE DIRECTION
ATTENTION: THIS BARSKA LASER SIGHT IS A
POWERFUL TARGETING DEVICE THAT
REQUIRES SPECIAL ATTENTION WHEN
OPERATING. CAREFULLY READ THE
FOLLOWING INSTRUCTIONS AND SAFETY
PRECAUTIONS BEFORE USING THIS
PRODUCT.
CAUTION: UNAUTHORIZED USE
MODIFICATIONS OF ADJUSTMENTS OR
PERFORMANCE OF PROCEDURE OTHER
THAN SPECIFIED HEREIN MAY RESULT IN
DANGEROUS/HAZARDOUS RADIATION
EXPOSURE.
LASER LIGHT: AVOID DIRECT EYE
EXPOSURE.
WARNING KEEP OUT OF REACH OF CHILDREN.
DO NOT POINT LASER AT PEOPLE, PETS, SHINY/HIGHLY
REFLECTIVE SURFACES, AIRPLANES OR ANY OTHER OBJECT NOT
INTENDED FOR DESIGNATED USE.