Carlon PVC Multi-Gard - Low Res - Manual (Page 5)

www.carlonsales.com
10
Multi-Gard ® PVC – Repair Kits
Repair Kits
Repairing Multi-Gard with Damaged Cables
E940F PVC Coupling
Couples PVC innerduct with solvent cement
for empty cells (standard grade qt. cement
#VC9962).
MAFPG7 Fiber Optic Simplex Plug
(cable O.D. range .57 - .65) Seals innerduct
with cable installed.
MAQPG2 Quadplex Plug (4 holes each)
Seals outershell and innerduct
1
2
3
4
5
Repair Kit Instructions:
1. Dig around break area enough to allow vault to
drop over the repair area and rest level when the
mouseholes have been cut away for the duct.
2. Cut away and remove outer shell and any
damaged inner-ducts, being careful to protect
any exposed cables.
3. Cut back the outer duct to allow approximately
6" of inner-duct exposed.
4. Install the splice case per manufacturer’s or
customer’s specifications, allowing enough cable
slack so no tension is felt.
2
1
3 4 1 3
2
5
6
6
48808DK PVC Pass-through Kit
(4 x 20' lengths) 20 foot lengths can be cut to
length for continuous empty innerduct.
Underground Vault & Lid needed
Choose size & construction based on dimensions
of splice cases and weight requirements. (Allow
12" on either side of splice for bending
innerduct)
Splice Case
5. Install the quad plugs (Item #3) and single
plugs (Item #2) in duct containing cable.
6. Install pass-through ducts (Item #4) with
coupling (Item #1) sealing with solvent cement.
7. Set the enclosure base over the entire package
and place cover on enclosure.
8. Refill hole as required.
Gross Automation (877) 268-3700 · www.carlonsales.com · [email protected]