Adjustable floor box assembly, Package contents – Carlon White Adjustable Floor Box Kit - Low Res User Manual
Page 4
25701 Science Park Drive • Cleveland, Ohio 44122 • www.carlon.com
Adjustable
Floor Box
Assembly
• One (1) New Work Bracket
• One (1) Old Work Bracket
• One (1) 20 cubic in. UL Listed floor box
• One (1) UL Listed white floor cover
• One (1) short shank receptacle
Package Contents
Plug
White Cover
Receptacle
Adjusting Screw
New Work Bracket
Old Work Bracket
20 cu. in. Floor Box
• Two (2) 6-32x1 flat head machine screws
• Four (4) #6 1-1/4 self-tapping flat head screws
• Two (2) #6 square drive trim head screws
• One (1) tube Dow Corning #4 sealant
• Installation instructions
Caution: The floor box has undergone a scrub water test as required by UL under criteria
specified in 514C for this type of application. However, it is not intended for nor approved for
wet locations or outdoor installation.
IS121W 01/03
© Lamson & Sessions 2003
Gross Automation (877) 268-3700 · www.carlonsales.com · [email protected]