Carlon White Adjustable Floor Box Kit - Low Res - Manual (Page 2)

INSTALLATION INSTRUCTIONS
This floor box is designed to be mounted on a
joist or subfloor. It can be installed on the top of
the joist or from the bottom if the thickness of
the joist is sufficient to allow installation of the
box. If the unit is to be installed from the bottom
of the joist, check prior to installation to ensure
there is sufficient adjustment remaining as this
type of installation is non-standard.
The unit can also be installed using the old work
(small) bracket that is included. This bracket
facilitates the installation of the box in areas
where the larger new work bracket cannot be
used. The old work bracket edge is hidden by the
cover when installed. However, before cutting into
the wood, you must ensure that the mounting
screws will properly support the bracket/box
installation.
For planning purposes please ensure that the
maximum installed height to the bottom of the
cover does not exceed 1-3/4" above the top of the
mounting bracket.
The kit is listed as a floor box by Underwriters
Laboratories. The kit also has a two (2) hour fire
classification. Only covers manufactured for this
box can be used with this assembly.
Floor box kit should be installed by a certified
electrician.
Install clip over subfloor.
Screw in to adjust to height
of flooring or carpet.
Beautiful flush fit every time!
2-HR-F
FLOOR BOX
696Y
Assembled in USA
Patent #5,289,934
Gross Automation (877) 268-3700 · www.carlonsales.com · [email protected]