Bray 6P P_P Series - Manual (Page 4)

Bray Series 6P
Operation and Maintenance Manual
4
Introduction
Every Series 6P is fully inspected after production
to offer the highest quality products. However, we
strongly recommend users read this manual carefully
to ensure the product is utilized to its fullest potential.
• This manual should be given to the end-user.
• This manual may be changed or revised without
any prior notice. The most current version of this
O&M is available at www.bray.com.
Product Description
Main Features and Functions
• The product has been designed to operate nor-
mally in a typical industrial environment.
• The durability has been proven after testing for two
million cycles under typical operating conditions.
• Response time is very quick and accurate.
• Can be easily switched to a 2 way split range by
changing the Span Spring
• High energy efficiency due to its low
air-consumption.
• Simple Zero & Span adjustment procedures.
• Position Feedback and switch modules
are available.
• Convert Double Acting to Single Acting simply
by putting a pipe plug in OUT 2.
Manufacturer Warranty
Warranty - Bray provides the following warranty
regarding products manufactured by it.
THE WARRANTY STATED HEREIN IS
EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES AND REPRESENTATIONS,
EXPRESSED OR IMPLIED, OR STATUTORY,
INCLUDING, WITHOUT LIMITATION, THE
IMPLIED WARRANTY OF MERCHANTABILITY
OR THE IMPLIED WARRANTY OF FITNESS FOR
A PARTICULAR PURPOSE.
Bray warrants its products to be free from defects in
materials and workmanship when these products are
used for the purposes for which they were designed
and manufactured. Bray does not warrant its products
against chemical or stress corrosion or against any
other failure other than from defects in materials or
workmanship. The warranty period is for twelve
(12) months from installation date or eighteen (18)
months from shipment date, whichever date comes
first. Any claim regarding this warranty must be in
writing and received by Bray before the last effective
date of the warranty period. Upon Bray’s receipt of a
warranty claim, Bray reserves the right to inspect the
product(s) in question at either the field location or
at Bray’s Manufacturing Plant. If, after inspection of
the product(s) in question, Bray determines that the
purchaser’s claim is covered by this warranty, Bray’s
sole liability and the purchaser’s sole remedy under
this warranty is limited to the refunding of the purchase
price or repair or replacement thereof at Bray’s option.
Bray will not be liable for any costs of repairs, labor,
material, or other expenses that are not specifically
authorized in writing by Bray, and in no event shall
Bray be liable for any direct or consequential damages
arising out of any defect or from any cause whatsoever.
If any Bray product is modified or altered at any
location other than Bray’s Houston Manufacturing
Plant without the express written authorization of
Bray, then this warranty is null and void. Any products
sold by Bray but manufactured by companies other
than Bray are not covered by this warranty. The
warranty for such products shall be subject only to the
warranty relief, if any, provided by the suppliers and/or
manufacturers of such products.