beautypg.com

Setting the kitchen timer, No hotplate should have been selected, Set the required cooking time using the twist knob – Neff T15T40X0 User Manual

Page 28: When the cooking time has elapsed, Changing the time, Keep warm function, Switching on the keep warm function, Select the hotplate using the twist knob, In the next 5 seconds, touch the l symbol, Switching off the keep warm function

background image

28

Setting the kitchen timer
No hotplate should have been selected.

1.

Touch the 3 symbol, ‹‹ lights up in the timer display.

2.

Set the required cooking time using the twist knob.

The timer starts counting down after a few seconds.

When the cooking time has elapsed
A signal sounds for one minute and ‹‹ lights up in the timer

display. The V indicator flashes. Touch any control. The

indicators go out and the audible signal ceases.

Changing the time
Touch the 3 symbol and use the twist knob to change the time.

Keep warm function

The keep warm function is suitable for melting chocolate or

butter and for warming food and cookware.
Switching on the keep warm function:

1.

Select the hotplate using the twist knob.

2.

In the next 5 seconds, touch the L symbol.

– appears in the heat setting display. The keep warm function

is switched on.
Switching off the keep warm function:
Select the hotplate and touch the L symbol. ‹ appears in the

heat setting display.
After approximately 5 seconds, the hotplate is switched off, and

the residual heat indicator appears.

Wipe protection

If you wipe over the control panel while the hob is switched on,

settings may be altered.
To prevent this from happening, your hob has a wipe protection

function. Touch the " symbol. A signal sounds. The control

panel is locked for 30 seconds. You can now wipe over the

control panel without altering any settings.

Note: The main switch is excluded from the wipe protection

function. You can switch off the hob at any time.

Automatic time limit

If a hotplate is in use for a long time without the setting being

changed, the automatic time limit is activated.
The hotplate stops heating. ” and ‰ flash alternately in the

hotplate indicator.

The display goes out when you touch any control. You can

make new settings.
When the time limit is activated depends on the heat setting

selected (1 to 10 hours).

Basic settings

Your appliance has various basic settings. You can adapt these

settings to your needs.

Indicator

Function

™‚

Automatic childproof lock
‹ Switched off.*
‚ Switched on.

™ƒ

Audible signal
‹ Confirmation signal and fault notification switched off.
‚ Only fault notification switched on.
ƒ Confirmation signal and fault notification switched on.*

™†

Automatic timer
‹ Switched off.*
‚-ŠŠ Cooking time, after which the hotplates switch off

™‡

Duration of the timer end signal
‚ 10 seconds.
ƒ n30 seconds
„ 1 minute.*

*Basic setting

This manual is related to the following products: