B&K Precision 732A - Manual - Manual (Page 2)

1
I. SAFETY INFORMATION
Read the following safety information carefully before attempting to operate or
service the meter.
Use the meter only as specified in this manual; otherwise, the protection provided
by the meter may be impaired.
Environment conditions
§ Altitude up to 2000 meters
§ Relatively humidity 90% max.
§ Operation Ambient 0° ~ 40°
C
Maintenance & Clearing
§ Repairs or servicing not covered in this manual should only be performed by
qualified personnel.
§ Periodically wipe the case with a dry cloth. Do not use abrasives or solvents on
this instruments.
Safety symbols
Comply with EMC
When servicing, use only specified replacement parts.
II. GENERAL DESCRIPTION
Thank you for using our Data Logger Sound Level Meter. To ensure that you can
get the most from it, we recommend that you read and follow the manual carefully
before use.
This unit conforms to the IEC651 type2, ANSI S1.4 Type2 for Sound Level Meters.
This Data Logger Sound Level Meter internal memory can keep up to 32000
records.
(Note 1.)
It uses RS232 interface to perform bi-directional communication with PC.
Note1 (model 735):
Press “REC” to begin recording, press “REC” again to stop recording. The data will be loaded into
the memory until it is full.