B&K Precision 732A - Manual - Manual (Page 14)

13
When you have the Sound Level DATA LOGGER meter connected to PC and
select "DataLogger" from main menu or click from tool bar to load recorded
data from the meter and there will be a progress indicator to show the loading
progress. if an error occurs, just click "DataLogger" again.
After the data is loaded, the left hand side will show how many data sets were
loaded and detail information for each data set (start data, start time, recording
rate and record numbers).
For examples:
It will transfer data to a graph and tabular on the right hand side every time
after you load recorded data from the Sound Level Meter and you can click at any
data set to change the set for graph.
On the right hand side is the waveform graph and statistic of the data set you
choose.
§ Tutorial - Quick Start to Use AK-73X TestLink
(1.) Recording real time data in waveform.
1.Power on the Sound Level Meter first and connect it to a PC via the RS-232
serial port with the cable (SE-300)
2.Start AK-73X program.