Autel MaxiTPMS TS501 - Manual (Page 8)

7
6) “
”-- Indicates deflation is required to activate TPMS sensor.
7) “
” -- Indicates test mode One Wheel of Wheels to Test in
the system setting is selected.
8) “
” -- Indicates test mode ALL Wheels of Wheels to Test in
the system setting is selected.
9) “ ” – Indicates the TPMS tool is sending signals to the tire
sensor for activation and test.
10) “
” – Indicates tool communication with the vehicle’s OBDII
DLC.
3.5 Keyboard
No solvents such as alcohol are allowed to clean the keypad or
display. Use a mild nonabrasive detergent and a soft cotton cloth. Do
not soak the keypad as the keypad is not waterproof.
3.6 Battery Charging
The TPMS tool has a 3.7V built-in lithium-ion polymer rechargeable
battery. There are two means of battery charging:
 To charge battery by power adapter.
1) Locate the power port of the device.
2) Connect the device and the power source with the adapter.
 To charge battery by USB cable
1) Locate the USB port of the device.
2) Connect the device and the computer with the USB cable.
For optimum performance, always keep your tool sufficiently
charged. It is recommended that you charge the tool for over 2 hours
before the first use.
NOTE: Only use the power adaptor or USB cable that is
included in our pack to charge this tool. The use of