Autel MaxiTPMS TS501 - Manual (Page 14)

13
1) From System Setting screen, use the UP/DOWN scroll button
and LEFT/RIGHT scroll button to select Wheels to Test, and
press the Y button.
2) From Wheel to test screen, use the LEFT/RIGHT scroll button
to select All Wheels or One Wheel mode for TPMS sensor
testing. (Figure 3.8)
Figure 3.8
3) Press the Y button to save your selection or the N button to exit
without change.
NOTE: In All Wheels mode, the tool will determine if a
duplicate sensor ID has been read. In this case, the tool will
display a message “Sensor ID Duplicated.” In One Wheel
mode, the tool will not check the duplicate sensor ID.
Distance Unit
1) From System Setting screen, use the UP/DOWN scroll button
and LEFT/RIGHT scroll button to select Distance Unit, and
press the Y button.
2) From Distance Unit screen, use the LEFT/RIGHT scroll button
to select the desired unit of distance: Km or mile. (Figure 3.9)