Atec Xantrex-XDC60-100 - Manual

www.xantrex.com
© 2004 Xantrex Technology Inc. All rights reserved. Xantrex is a registered trademark of Xantrex International. DS20040518R03_xdc6kw. Printed in Canada.
Xantrex Technology Inc.
Headquarters
8999 Nelson Way
Burnaby, British Columbia
Canada V5A 4B5
800 670 0707 Toll Free
604 420 1591 Fax
5916 195th Street NE
Arlington, Washington
USA 98223
800 446 6180 Toll Free
360 925 5144 Fax
XDC 6 kW
6 kW Digital Controlled Programmable DC Power Supply
Provides 6 kW of DC Power for Test and Measurement Applications
The Xantrex XDC 6 kW digital controlled programmable DC power supply provides clean, reliable power
for ATE, burn-in, magnet charging, OEM, and other test and measurement applications. With an embedded
controller, it has a unique menu-driven auto sequencing capability, which allows for complex test sequences to be
entered and saved via the front panel without the need for external computers or software.
With the XDC 6 kW, ten different test programs of up to 99 voltage level steps each, can be constructed
and executed by a manual or external trigger. This stand-alone capability can be used for constructing
simple voltage ramps, battery charging and simulation of battery voltage at engine start-up, component
testing, and MIL 704E testing. Additionally, ten configurations of differing protection and output set
points can also be conveniently stored, recalled, or set for default at start up.
The XDC 6 kW comes in a compact 5.25-inch (3U) high rack package and is available in ten models. It
can also be configured into high power systems of 18 kW, 24 kW, or 30 kW by adding parallel XDC 6
kW slave modules that are controlled from a master XDC unit via a CANbus communications link.
Product Features
Embedded controller
Zero voltage “Soft Switching”
Power Factor Correction (PFC)
Simultaneous display of output voltage and current
Constant power mode
Current sharing for parallel operation
Remote sense with 5 V line loss compensation
RS-232 interface
LabVIEW® and LabWindows® drivers
Protection Features
Over and under voltage protection
Over and under current protection
Over and under power protection
Over temperature protection
Sense protection
Options
GPIB (IEEE 488.2 with SCPI)
CANbus communications link for multiple unit current sharing and addressing
High voltage input: 3-phase, 342-500 VAC