Atec Tektronix-TDS7154 - Manual (Page 8)

Digital Phosphor Oscilloscopes
TDS7000 Series
Waveform
Measurements
Amplitude – Amplitude, High, Low, Maximum,
Minimum, Peak to Peak, Mean, Cycle Mean, RMS,
Cycle RMS, Positive Overshoot, Negative Overshoot.
Time – Rise time, Fall time, Positive Width, Negative
Width, Positive Duty Cycle, Negative Duty Cycle,
Period, Frequency, Delay.
Combination – Area, Cycle Area, Phase, Burst Width.
Histogram-related – Waveform count, Hits in box,
Peak hits, Median, Maximum, Minimum, Peak to
Peak, Mean (µ), Standard Deviation (sigma),
µ+1 (sigma), µ+2 (sigma), µ+3 (sigma).
Waveform
Processing/Math
Algebraic Expressions – Define extensive algebraic
expressions including waveforms, scalars and results of
parametric measurements e.g. (Integral (CH.1-
Meas(CH.1))*1.414.
Arithmetic – Add, subtract, multiply, divide wave-
forms and scalars.
Relational – Boolean result of comparison >, <, >=,
<=, ==, !=.
Calculus – Integrate, differentiate.
Frequency Domain Functions – Spectral magnitude
and phase, real and imaginary spectra.
Vertical Units – Magnitude: Linear, dB, dBm; Phase:
Degrees, radians.
Window Functions – Rectangular, Hamming,
Hanning, Kaiser-Bessel, Blackman-Harris, Gaussian,
Flattop2, Tek Exponential.
Display Characteristics
Display Type – Liquid crystal active-matrix
color display.
Display Size – 211.2 mm (8.32 in.) (W) x 158.4 mm
(6.24 in.) (H), 264 mm (10.4 in.) diagonal.
Display Resolution – 640 horizontal x 480
vertical pixels.
Waveform Styles – Vectors, Dots, Variable
Persistence, Infinite Persistence.
Computer System and
Peripherals
CPU – Intel Celeron processor, 566 MHz.
PC System Memory – 256 MB.
Hard Disk Drive – Rear-panel, removable hard disk
drive, >4.3 GB capacity.
Floppy Disk Drive – Front-panel 3.5 in floppy disk
drive, 1.44 MB capacity.
CD-ROM Drive – Rear-panel CD-ROM drive.
Mouse – Logitech thumb wheel model included,
USB interface.
Keyboard – Order 118-9402-00 for small keyboard
(fits in pouch); PS-2 interface. Order 119-6297-00
for full-size keyboard; USB interface and hub.
Input/Output Ports
Probe Compensator Output – Front panel BNC con-
nector, requires Probe Cal-Deskew Fixture (included) for
probe attachment. Amplitude 200 mV ±20% into a
≥
50
Ω
load, frequency 1 kHz ±5%.
Analog Signal Output Amplitude – Front-panel BNC
connector, provides a buffered version of the signal
that is attached to the Ch 3 input when Ch 3 is
selected as trigger source. 20 mV/div ±20% into a
1 M
Ω
load, 10 mV/div ±20% into a 50
Ω
load.
Analog Signal Output Bandwidth, Typical –
TDS7054, TDS7104: 100 MHz into a 50
Ω
load.
TDS7254/TDS7404: 1 GHz into a 50
Ω
load.
External Timebase Reference In – Rear-panel
BNC connector, timebase system can phase-lock to
external 10 MHz reference.
Timebase Reference Out – Rear-panel BNC
connector, accepts TTL-compatible output of internal
10 MHz reference oscillator.
TDS7254/TDS7404: 1 GHz into a 50
Ω
load.
Auxiliary Output Levels – Front-panel BNC
connector, provides a TTL-compatible, polarity
switchable pulse when the oscilloscope triggers.
Parallel Port – IEEE 1284, DB-25 connector.
Audio Ports – Miniature phone jacks for stereo
microphone input and stereo line output.
USB Port – Allows connection or disconnection
of USB keyboard and/or mouse while oscilloscope
power is on.
Keyboard Port – PS-2 compatible.
Mouse Port – PS-2 compatible.
LAN Port – RJ-45 connector, supports 10Base-T and
100Base-T.
Serial Port – DB-9 COM1 port.
SVGA Video Port – DB-15 female connector; connect
a second monitor to use dual-monitor display mode.
Supports basic requirements of PC99 specifications.
GPIB Port – IEEE 488.2 standard.
Scope VGA Video Port – DB-15 female connector,
31.6 kHz sync, EIA RS-343A compliant, connect to
show the oscilloscope display, including live wave-
forms on an external monitor or projector.
Digital Phosphor Oscilloscopes • www.tektronix.com/tds7000 8