Atec Tektronix-TDS6804B - Manual (Page 8)

Digital Storage Oscilloscope
TDS6000B/C Series
Trigger Types
Edge –
Positive and/or negative slope on any channel or
front panel auxiliary input. Coupling includes DC,
AC, noise reject, HF reject and LF reject.
Glitch –
Trigger on or reject glitches of positive, negative
or either polarity. Minimum glitch width is down
to 100 ps with re-arm time of 250 ps.
Width –
Trigger on width of positive or negative pulse
(down to 100 ps) either within or out of selectable
time limits.
Runt –
Trigger on a pulse that crosses one threshold but
fails to cross a second threshold before crossing
the first again. Optional time qualification.
Timeout –
Trigger on an event which remains high, low or
either for a specified time period, selectable from
360 ps to 1 s.
Transition –
Trigger on pulse edge rates that are faster or
slower than specified. Slope may be positive,
negative or either.
Setup/Hold –
Trigger on violations of both setup time and hold
time between clock and data present on any two
input channels.
Pattern –
Trigger when pattern goes false or stays true for
specified period of time. Pattern (AND, OR, NAND,
NOR) specified for four input channels defined as
HIGH, LOW or Don’t Care.
State –
Any logical pattern of channels (1, 2, 3) clocked
by edge on channel 4. Trigger on rising or falling
clock edge.
Window –
Trigger on an event that enters or exits a window
defined by two user-adjustable thresholds. Event can
be time or logic qualified.
Trigger Delay by Time – 5 ns to 250 seconds.
Trigger Delay by Events – 1 to 10,000,000 events.
Waveform Measurements
Amplitude –
Amplitude, High, Low, Maximum, Minimum, Peak-to-
Peak, Mean, Cycle Mean, RMS, Cycle RMS, Positive
Overshoot, Negative Overshoot.
Time –
Rise Time, Fall Time, Positive Width, Negative Width,
Positive Duty Cycle, Negative Duty Cycle, Period,
Frequency, Delay.
Combination – Area, Cycle Area, Phase, Burst Width.
Histogram-related –
Waveform count, Hits in box, Peak hits, Median,
Maximum, Minimum, Peak-to-Peak, Mean (µ),
Standard Deviation (
σ), µ + 1σ, µ + 2σ, µ + 3σ.
Eye Pattern-related –
Extinction Ratio (absolute, %, and dB), Eye Height,
Eye Top, Eye Base, Eye Width, Crossing %, Jitter
(peak-to-peak, RMS and 6
σ), Noise (peak-to-peak
and RMS), S/N ratio, Cycle Distortion, Q-factor.
Waveform Processing/Math
Algebraic Expressions –
Define extensive algebraic expressions including
waveforms, scalars and results of parametric meas-
urements e.g., (Integral (CH.1-Mean(CH.1)) x 1.414).
Arithmetic –
Add, subtract, multiply, divide waveforms
and scalars.
Relational –
Boolean result of comparison >, <,
≥, ≤, =, ≠.
Calculus – Integrate, differentiate.
Frequency Domain Functions –
Spectral magnitude and phase, real and
imaginary spectra.
Vertical Units –
Magnitude: Linear, dB, dBm;
Phase: Degrees, radians.
Window Functions –
Rectangular, Hamming, Hanning, Kaiser-Bessel,
Blackman-Harris, Gaussian, Flattop2,
Tek Exponential.
Waveform Definition – As arbitrary math expressions.
Display Characteristics
Display Type – Liquid crystal active-matrix
color display.
Display Size – Diagonal: 264 mm (10.4 in.).
Display Resolution –
1024 horizontal x 768 vertical pixels.
Waveform Styles –
Vectors, Dots, Variable Persistence,
Infinite Persistence.
Computer System
and Peripherals
CPU – Intel Pentium 4 processor, 2.8 GHz.
PC System RAM – 1 GB (266 MHz DDR).
Hard Disk Drive –
40 GB removable hard disk drive: rear-panel
standard or front-panel (Option FHD).
USB Ports –
One front panel, four on rear panel, USB 2.0 compliant.
CD-R/W Drive –
Front-panel CD-R/W standard or rear-panel
(Option FHD).
Mouse –
Optical scroll wheel model included, USB interface.
Keyboard –
Small keyboard included (fits in pouch). Order
119-6297-xx for full-size keyboard; USB interface
and hub.
Input/Output Ports
Front Panel
Fast Edge Output –
Front panel SMA connector provides fast edge
signal. TDS6000B models: Amplitude 350 mV
±20% into a
≥50 Ω load, frequency 1 kHz ±5%,
200 ps typical rise time.
TDS6000C models: Amplitude 440 mV
pk-pk
, ±20% in
a 50 Ω load; VOH +0.3 V, VOL – 0.14 V; frequency
1 kHz ±5%, 200 ps typical rise time.
Digital Storage Oscilloscopes • www.tektronix.com/oscilloscopes 8
Pinpoint ™ Trigger System (continued)
All Models
Trigger Characteristics (continued)
Serial Pattern Trigger (requires Option ST) 64-Bit serial word recognizer, bits specified in binary (high, low, don’t care)
or hex format. Trigger on NRZ-encoded data up to 1.25 Gbaud. TDS6000C
models only: trigger on 8b/10b encoded data up to 3.125 Gbaud (40 bits)
Trigger Level Range
Internal ±12 divisions from center of screen
External (auxiliary in) ±5 V
Line Fixed at 0 V
Trigger Coupling DC, AC (attenuate <60 Hz), HF reject (attenuate >30 kHz).
LF reject (attenuates <80 kHz) Noise reject (reduce sensitivity)
Trigger Holdoff Range 250 ns minimum to 12 s maximum