Atec StanhopeSeta-Avcount2 - Manual (Page 3)

www.stanhope-seta.co.uk www.seta-analytics.com
Key Features
• Particle size ISO 11171: 4μm(c) to >70μm(c); ISO 4402: 2μm to >100μm; GOST 17216-71: 2μm to >200μm
• Cumulative & distributive particle numbers
• Particle count on cleanliness code
• Uses “Straight from the Bottle” samples
• Precise and reliable results
• Easy to use large touch screen display, integrated printer
• Rugged, stainless steel case suitable for laboratory or portable use
• Typical test time of less than 6 minutes
• 15 fixed measuring channels (calibration in compliance with ISO MTD for measuring in oil)
• An upper and lower limit value can be set for each of the first 8 counting channels
• Integral Data storage for up to 2000 measurements across 60 memories
• Internal Double Pump System
• Optional in-line high pressure testing up to 310 Bar
How AvCount2 operates
• The sample is drawn into analyser by an integral double pump
• Automatic changeover valve means that no operator intervention is required
• 10ml of sample flows at 30ml/minute through the measuring cell
• Particulate is measured by light reduction across the cell
• Light reduction is proportional to particle size
• Results are automatically reported
Results are displayed in real time and are simultaneously printed out on the integral printer. The
test methods embedded in AvCount2 cover a range of fuels, lubricating oils and hydraulic fluids
and can be edited to create custom test profiles.
Versatile connectivity and memory management allow results to be accessed, printed out or
downloaded to a memory stick or to a personal computer. The analyser can also be controlled
via an RS232 port.
Fuel Types
• Aviation turbine oils
• Biofuels and blends
• Heating oil
• Gas oil
• Diesel – automotive and marine gasoline
• Kerosene