Atec Thermonics-T-2500SE - Manual (Page 5)

On-Screen Graphics
Numerical representations of the DUT, air and
set-point temperatures continuously display. A
screen that presents the data in graphical form
similar to a chart recorder is provided at the
touch of a key. Logged data can be stored and
recalled.
Scrolling Graph Screen Numeric Keypad
Fully-Motorized Arm
ESD Protection
Grounding of all surfaces and air pathways prevents the development
of electro-static discharge (ESD) which can damage sensitive semicon-
ductor components.
Optional Air Ionizer
ESD protection can be further enhanced by inclusion of the optional
air ionizer. The ionizer provides an ion balance that prevents a charge
from developing in the air stream and removes charges from non-con-
ductive surfaces. Conductive silicon rubber thermal caps and insula-
tion sheets are also available.
Integrated Thermal Test Head and
Motorized Arm
Provides a strong support for adapting the
thermal test head to the DUT. The positive
action, quick adjust arm has several degrees of
freedom that enable it to be positioned in a
wide range of horizontal and vertical positions.
The combination of electro-mechanical and
pneumatic action of this assembly ensures pre-
cise, stable and repeatable placement of the
thermal fixture over the DUT. Heated purge air
is provided to keep the test interface free of
frost or moisture when operating at cold tem-
peratures. Ambient purge air prevents overheat-
ing of test electronics when testing at hot tem-
peratures.