Atec Thermonics-T-2500SE - Manual (Page 4)

World-Wide Service and Support
Service is available around the world. Whether
you’re the U.S.A., Asia, or Europe, your system
can be serviced quickly and efficiently by a
qualified technician. Telephone support is
always available from the factory.
Further Information
For additional information on this new product,
call a Thermonics Sales Representative today!
(408) 542-5900
Thorough Documentation
Comprehensive, easy to read Users and
Maintenance Manuals are provided with the
T-2500SE. These manuals provide information
on operation of the system, routine preventive
maintenance, and service.
High Productivity
The wide temperature range of -90C to +225C,
in conjunction with the rapid transition rate,
can quickly and accurately bring devices to test
temperature.
Optional LN
2
injection can further increase
productivity when testing large devices at
extreme low temperatures.
Efficient Air Dryer
To ensure the use of clean, dry air a built-in air
dryer removes water vapor and particles from
the compressed air source. This heatless air
dryer lowers the dew point of the source air to
approximately -80C.
Optional Systems
T-2500E provides a lower cost solution with an
economical, easily-adjusted arm. The system
has a temperature range of -80C to +225C, and
air temperature transitions between +125C and
-55C in 10 seconds. Vertical motion of the arm
is motorized and horizontal motion is manual.
T-2500BE replaces the arm with a basic out-
put hose. This system is ideal for use in appli-
cations that incorporate the use of custom test
fixtures.
Models T-2500IX and T-2500IX/M, which can
achieve cold temperatures of -100C and -130C,
respectively, are ideal for test applications that
require extremely low temperatures.
The T-2500IX/M uses uses liquid nitrogen to
facilitate cooling and is an optimal solution for
large power dissipating devices in the 50 to
100W range.
Conductive Thermal Caps
DUT Sensor
The case temperature of the DUT can be deter-
mined with the use of the DUT sensor (K-type
or T-type). This feature makes it possible to con-
trol the temperature of the DUT to within
±
1C
of the desired temperature setpoint. In addition,
an advanced temperature control algorithm
assures the DUT is stabilized at temperature
quickly.
CE Certification
For use in Europe, CE certification is provided.
A Test Enterprises Company