Atec Soltec-TA220-1000 Series User Manual

Page 6

SPECIFICATIONS

(cont.)

Trigger Specifications

Trigger Mode
Trigger Source

Trigger Setting

Related Functions

OR, AND, A then B, WINDOW

Input signal; Time trigger (start time,

end time, measurement interval);

Manual trigger; External trigger.
Amps other than Event Amp (AP11-105)

Trigger slope Q or Q, OR, AND,

A then B, WINDOW (Outside or Inside).
Level setting : Can be Set with
engineering units, e.g., PSI or Volts.
Event amp (AP11-105)
State setting: H, L or OFF can be set
for each each input.
When OFF, trigger is not active.

Trigger setting : AND or OR of the
state setting for CH1 to CH8.

Pre-trigger, trigger path count, trigger

filter, trigger mark

RS-232C Interface (Standard)

Remote Control

Modem Control

FAX Transmission

Controls the main unit from a computer
via RS-232C cable.
Communicate between a computer
and the TA220-1000 Series unit via
modem on telephone line.
Transmits measured waveform
using a FAX modem connected to

RS-232C port.

GP-IB Interface (Option)

Remote Control

SCSI Interface (Option)

Controls the TA220-1000 Series unit

from a computer via GP-IB cable.

Stores data to external memory
devices, such as MO, PD, or ZIP™.

FFT (Option)

1 Signal Analysis

2 Signal Analysis

Window Function

Additional

Process

Analysis

Frequency

Resolution

Linear spectrum, power spectrum,
RMS spectrum, power spectrum

density, and octave analysis (1/1, 1/3).
Transfer function, coherence function,
and cross-power spectrum.
Rectangular, hanning, hamming,
exponential, and force.
Simple additional average (time axis),
simple additional average
(frequency axis), exponential weighted
average (frequency axis), and peak hold.

400kHz, 200kHz, 80kHz, 40kHz, 20kHz,

10kHz, 5kHz, 2kHz, 1kHz, 500Hz, 200Hz,

100Hz, 50Hz, 20Hz, 10Hz

Real-time: 400, 800, 1600 data samples.
Memory Mode: 1000, 2000, 4000
data samples.

EXTERNAL VIEW

GP-IB

(Option)

RS-232C

Remote Control Inputs

Printer section

(TA220-1200/1300)

Plug-in Signal Input Amplifier Module

SCSI (Option)

SCSI unit is the interface to allow MO, PD, or Zip™
to be used as external storage devices.

PC card slot

ATA flash cards and SRAM cards can be used.

Color LCD

display

Operation

panel

FDD

AC power

AC strain gage bridge power (Option)

12977 Arroyo Street, San Fernando, CA 91340-1548

800-423-2344 • 818-365-0800 • Fax 818-365-7839

Email: [email protected] • www.SoltecCorp.com

line