Atec Soltec-TA220-1000 Series - Manual (Page 3)

SELECT EXPANSION FUNCTIONS
ACCORDING TO MEASUREMENT NEEDS
Two expansion functions are provided as option:
•
FFT (Option)
The following eight functions are supported:
Linear spectrum, power spectrum, RMS spectrum,
power spectrum density, octave analysis, transfer
function, cross power spectrum, and coherence function.
•
Waveform Judgement (Option)
Waveform judgment option compares incoming
waveforms to waveforms stored in memory. If the
incoming waveform is out of tolerance, a trigger is
activated.
ARITHMETIC OPERATION (Standard)
Provides arithmetic operations on data located in
specified areas of memory. The results of
operations are displayed in the screen and stored
in the form of a waveform or a file.
Operations Include: Four (4) basic arithmetic
operations, maximum, minimum, P-P value,
average area, RMS, standard deviation, rise time,
fall time, absolute value, differential, integral,
linear/quadratic differential, single/double integral,
square root, exponent, common logarithm,
moving average, and trigonometric functions
(sine, cos, tan, asin, acos, and atan).
DISPLAY EXAMPLES
User customized display;
channelized, overlap, etc.
Monitor data during
input amplifier setup
Replay monitor Customized display of
event signals
PLUG-IN SIGNAL INPUT AMPLIFIER
MODULES
Amplifiers are available to support a wide range of
measurement conditions. The plug-in module
design allows easy configuration changes.
2CH High
Resolution
Voltage Amp.
AP11-101
2CH High
Speed Voltage
Amp.
AP11-103
2CH TC
Voltage Amp.
AP11-106
1CH TC
Voltage Amp.
AP11-107
Event Amp.
AP11-105
2CH AC
Strain Amp.
AP11-104
2CK DC
Strain Amp.
AP11-110
2CH RMS •
Vibration Amp.
AP11-109
2CH FFT Amp.
AP11-102
1CH F/V
Converter
AP11-108
16 bits 10µs
12 bits 1µs
15 bits 10µs
14 bits 10µs
16 bits 10µs
16 bits 10µs
16 bits 10µs
16 bits 10µs
16 bits 10µs
High resolution voltage
amplifier with 500V
maximum input
High speed voltage
amplifier with 500V
maximum input
Thermocouple and
voltage
Thermocouple and
voltage amplifier
Logic input (8CH)
Strain gage and strain-
gage sensor input with
high resistance to noise
from power line
Strain gage and strain-
gage sensor input with
high frequency response
DC amplifier. 500V
max. input with charge
sensor power supply,
RMS converter and
bandpass filter
Voltage amplifier. 500V
max. input with anti-
aliasing filter and power
supply for charge sensor
Converts frequency
(e.g. pulses) into voltage
1µs