Atec Soltec-TA220-1000 Series - Manual (Page 5)

SPECIFICATIONS (cont.)
Memory Mode
Data Recording
Measurement
Operation
Memory Capacity
Memory Divisions
Sampling
Once, Repeat, Endless
256kW/CH (Option: 1MW/CH)
When using dual channel
modules, module memory may
be combined to provide up to
2 Mega Data on one channel.
1, 2, 4, 8, 16, 32, 64 and 128
1µs (1MS/s)~1s (1S/s), User
sets sampling rate in 1µs steps.
External synchronization
possible.
Display (Replay Monitor)
Waveform
X-Y
Magnification : x 5 to x 1/1000
User can select any channel
to be X-axis, and any other
channel(s) for Y-axis.
Printing (Models TA220-1200/1300 only)
Waveform
Alphanumeric
X- Y
Memory Storage
Print density : Voltage axis:
8 dots/mm
Time axis : 10/80 dots/mm
Magnification : × 5 to × 1/1000
Read out interval : Selectable
1 to 1000 data measurements.
User can select any channel
to be X-axis and any other
channel for Y-axis.
Effective print range :
200mm x 200mm
Print density : 400 dots (X-axis)
x 400 dots (Y-axis)
Captured data can be saved
as binary or CSV files.
Transient Mode
Transient Printing (TA220-1200/1300)
Function
Real-time Set-up
Memory Set-up
Normally operates in the real-time
mode. When a trigger is detected,
transient is recorded to memory.
See "Real-time Mode".
See "Memory Mode".
Transient Storage
Function
Real-time Section
Memory Section
Normally operates in real-time
mode. Transient data is saved in
memory when trigger is detected.
When recording finishes, the
memory data is stored.
See "Data Storage" in the
Real-time Mode.
See "Memory Storage" in the
Memory Mode.
Real-time Mode (TA220-1200/1300)
Waveform Printing
Measurement
Start
Paper Speed
Frequency
Characteristics
Print Density
Print Length
Start Key, Trigger, Date/Time or
Interval.
25mm/s (200mm/s,TA220-1300)
to 1 mm/min, user set.
External synchronization provided.
DC~100kHz (sampling rate 10
points/cycle), Varies depending
on the input amplifier.
Voltage axis : 8 dots/mm, Time
axis: 10 dots/mm (80 dots/mm,
TA220-1300)
Continuous, or 1 to 1000
divisions-shot feed.
Alphanumeric Format
Sampling
Print Length
1 second to 1 hour per sample.
External synchronization possible.
Continuous, or 1 to 1000 data
samples shot feed.
X-Y Print
Operation
Effective Print
Area
Print Density
Print Speed
Data Storage
User can select any channel to
be X-axis and any other channel(s)
to be Y-axis.
Continuously measures until the
Stop key is pressed. Pause mode
provided.
200mm x 200mm
400 dots (X-axis) x 400 dots
(Y-axis)
10ms or more
Stores the measured data in a
memory device in real-time.
Storage rate: Synchronized with
paper speed.
Waveform Printing(TA220-1200/1300)
Function
Paper Speed
Frequency
Characteristics
Print Density
Print Length
Prints the waveform of input
signal.
25/200 mm/s~1mm/min, user set.
(Independent of sampling speed)
External synchronization possible.
DC to 100kHz (sampling rate
10 points/cycle). Varies depending
on the input units.
Voltage axis: 8 dots/mm,
Time axis: 10 dots/mm
(80 dots/mm, TA220-1300)
Continuous or 1 to 1000 divisions
shot-feed
12977 Arroyo Street • San Fernando, CA 91340-1548
(800) 423-2344 • (818) 365-0800 • Fax: (818) 365-7839
E-mail: [email protected] • www.SoltecCorp.com