Atec Soltec-TA220-1000 Series - Manual (Page 4)

SPECIFICATIONS
Basic Specifications
Display 10.4 inch TFT color LCD display.
Effective display area 211.2mm (8.32")
× 158.4mm (6.24") (640 × 480 dots)
Printer (Models TA220-1200 &TA220-1300)
Recording method
Paper width
Effective recording
width
Channel print
Battery Backup
Storage Devices
Interface Unit
Remote Terminal
Features
Clock function
Operating
Environment
Power Supply
Power Consumption
(Max)
Dimensions
Weight
Thermal array head and thermosensitive
chart
219.5mm (8.64")
200mm (7.87") FS in 1 div. to 10mm FS
in 16 div. variable
Prints channel No. in the vicinity of the
printed waveform
Backup for main unit settings, recording
conditions Backup time : Approx. 1 month
Built-in 3.5 inch FDD (1.25MB/1.44MB)
and PC card slot (ATA flash memory card,
SRAM card). Option: MO Disk Drive
w/ removeable cartridge 640, 540, 230,
128MB media, Internal or External
versions; Zip™ Drives
Standard RS-232C unit (38400 to 2400bps)
Option: GP-IB (IEEE488 compliant)
Option: SCSI (half pitch 50 pin type)
Start/stop, mark print, and paper feed
controlled by external signal.
Input: Sync pulse, Protect pulse.
Output: Waveform judge, Error
Stability : Daily error ± 35PPM
(at normal temp.)
Temperature: 0 to 40°C
(5 to 40° C when FFD is operating)
Humidity: 35 to 80%RH
(without condensation)
Vibration: MIL-STD-810E compliant
(except during FDD or MO operation)
90 to 132V or 180 to 264V AC.
Specify at time of order
Frequency: 47 to 63Hz
Option: DC power unit: 11 to 28V DC
TA220-1100: approx. 85VA
TA220-1200: approx. 180VA
TA220-1200/1300: Approx. 180 VA/400VA
(approx. 85VA stand-by)
approx. 369.5 (4.6")(W) × 150.5 (5.9")(H)
× 301(11.9")(D)mm
Approx. 7 kg (15 Ib)
Data Storage Mode
Data Recording
Function
Recording Speed
Recording
Method
Stores measured data in real time to a
memory medium (Real-time data storage).
200µs to 1s, user set. External
synchronization possible.
Linear Buffer: Stores set no. of data
samples and stops.
Loop (ring buffer): Overwrites old data
with most recent events.
Other Specifications
Printing functions (TA220-1200 & TA220-1300)
Data information
Channel
Information
Event Print
List Print
Screen Copy
Function
A4 Report Output
Printing Line
Width
Key Lock Function
Internal Storage of
Recorder Setups
Engineering Unit
Conversion
Auto-Start
Auto-Setup
Function
Screen Image
Store
Help Function
Measurement mode, year/month/day,
measurement start time, data No.,
trigger condition (trigger point,
year/month/day, time), sampling
speed, paper speed, time axis, etc.
are printed. Modes can be turned
ON or OFF.
Signal input amp. settings are printed.
Modes can be turned On or OFF.
In real-time mode, a manual or
external input event is marked on
chart along with date and time.
Date, time, measurement mode, data
No., print format, paper speed, sampling
speed, scale print, backlight auto-off,
auto-start, trigger mode, source
channel, recording operation and
file settings are printed.
Any screen can be printed or saved
to .BMP file.
Registers users comments and
prints them together with waveform
on A4 format.
Printing line width can be set for each
channel. (1, 2, 3, 4 dots)
Locks keyboard to prevent erroneous
operation.
4 different recorder setups can be
saved or recalled from internal memory.
Setups include amplifier settings.
Physical value conversion, full-scale
modification of display.
After a power failure, recording is
resumed. (Except during data filing)
Automatically reads the recorder
setup from floppy disk when power is
turned on. (Desired setup must be
previously stored on the floppy disk)
Stores a screen image in .BMP file.
Useful for reports.
Displays how to operate,
cautions, etc.
AC Bridge Power Supply Unit (Option)
Function
Power Source
Synchronism
Bridge power source for 2CH AC
strain amplifier model AP11-104.
2Vrms, sine wave 5kHz.
Synchronizes with other TA220-1000
series units in which an AC bridge
power unit is installed.