beautypg.com

Atec Gigatronics-8650A Series User Manual

Page 3

background image

a measurement start time

and duration to measure the

average power during a spe-

cific time period of a GSM

burst signal. The graphic dis-

play provides visual feedback

if you prefer to set the gate

manually. And, of course,

there is the ability to use the

TTL signal for automatically

setting the time gate control.

CDMA

The 8650A has the wide,

80 dB single sensor dynamic

range required for CDMA

signal open-loop tests, the

speed you need to quickly

measure power during

closed-loop tests, and the

10 MHz bandwidth needed

to test third-generation

CDMA signals.

INSTANTANEOUS

PEAK POWER

You can also measure the

instantaneous peak power

level of a pulse modulated

signal with the 8650A.

A built-in delay line lets you

trigger a few nanoseconds

ahead of the pulse for rising

edge measurements. While a

built-in time base gives you

sample delay control up to

100 ms after the trigger

point with 0.5 ns resolution.

And you can view the profile

and see the exact measure-

ment point on the pulse.

MAXIMUM PEAK

POWER

The peak hold feature of the

8650A lets you display the

highest instantaneous power

measured from the time the

feature is enabled until it is

reset.

The display value tracks

the measured value only

when it is rising to a new

maximum; when the meas-

ured value falls, the display

value holds at the maximum.

SELECTED
SAMPLE
POINT

HOLD

HOLD

HOLD

(RESET)

POWER

TIME

FREQUENCY

80 dB

PO

WER

AVERAGE

POWER

GPIB CW Measurement Speed (rdgs/s)

Normal Mode

>300

Swift Mode

>1,750

Fast Buffered Mode

>26,000

GPIB Modulated Measurement Speed (rdgs/s)

Normal Mode

>150

Swift Mode

>800

Fast Modulated Mode

>800

Asynchronous Sample Rate

2.5–5 MHz

Maximum Diode Sensor Video Bandwidth

20 MHz

Maximum Instrument Video Bandwidth

10 MHz

Maximum Single Sensor CW Dynamic Range

90 dB

Maximum Single Sensor Modulation Dynamic Range

TDMA/GSM

60–80 dB

CDMA (IS-95)

80 dB

Wideband CDMA (10 MHz bandwidth)

80 dB

Maximum Peak Power Sensor Rise Time

100 ns

Automatic Time Gate Setting

Yes

Direct Crest Factor Measurement

Yes

Statistical Power Measurement Analysis

Yes

Giga-tronics 8650A Features and Specifications