Atec Pacific-Power-320ASX - Manual

Model 320ASX
FREQUENCY CONVERSION R & D MANUFACTURING AEROSPACE MILITARY CUSTOM
1, 2 , or 3Ø – High Performance AC Power Source
T H E P O W E R O F E X P E R T I S E
2,000VA
15-1,200 Hz
1Ø4 0-150V
L-N
2Ø4 0-300V
L
1
-L
2
3Ø4 0-150/260V
L-L
Standard Features:
• 1 phase / 3 phase Selectable Output
from front panel or bus command
• 15 to 1,200 Hz. Operation – 5,000 Hz small
signal bandwidth
• Precision Voltage Programming – 0.05% with
Continuous Self-Calibration (CSC) engaged
• True-RMS metering of volts, amps, and
power
• GPIB (IEEE-488.2) or RS-232 Interface
• Waveform Library – Arbitrary Waveform
Generator
• 99 stored programs with associated
transients for static and dynamic test
applications
• UPC Studio Software Suite
• UPC Interactive LabVIEW
TM Libraries
Available options:
• M99211- 3Ø, 0-312/540V
L-L
external
transformer assembly
• Rack enclosures with caster base
• Programmable Output Impedance
• Harmonic Analysis and Waveform Synthesis
• Peak Inrush Capture and Waveform Analysis
• UPC Test Manager Software Application
UPC Manager Software Suite
Master the Power of the Wave!
UPC Manager
Software gives you
the tools necessary
to quickly and eas-
ily operate your AC
Power Source. With
our graphical interface
control all areas of
your AC Power Source
testing with simple
presets, user prompts,
test sequences, test
plans and custom reports.
Model 320-ASX
As a member of Pacific's ASX-Series family of high performance AC Power Sources,
the 320ASX offers the low acoustic noise, ease of installation, and maximum power
density found in all of Pacific's high frequency, pulse width modulated AC Power
Sources. Control and operational features provide a high degree of versatility and
ease for applications ranging from simple, manually controlled frequency conversion
to harmonic testing and sophisticated bus programmable transient simulation.
AC TEST POWER
The 320-ASX is equipped with a powerful micro-controller with the ability to operate as a
fully integrated test system. It supplies a variety of power conditions and transients to the
device under test while metering and analyzing all output performance parameters.
FREQUENCY/ VOLTAGE CONVERSION
The 320-ASX is an excellent source of stable AC Voltage over the frequency range of 15 to
1,200 Hz. The output frequency is quartz-crystal stabilized. Output voltages up to 300V are
available.
PHASE CONVERSION
With the ability to provide single, two, and three-phase outputs, the 320ASX is an ideal
choice to convert three-phase line voltage into precisely controlled split (two-phase) or
single-phase output power.
UPC SERIES CONTROLLER
Three controller models are available offering both manual and programmable control. All
controllers provide manual operation from the front panel. Programmable Controllers may
be operated from the front panel or from a remote interface via RS 232 or GPIB.
The Leader in AC Power Technology
An early pioneer in the development solid-state power conversion equipment,
Pacific Power Source continues to develop, manufacture, and market both linear
and high-performance PWM AC Power Sources. Pacific's reputation as a market
and technology leader is best demonstrated by its continuing investments in both
research and development and world-wide customer support. With corporate
owned offices in the United States, France, the United Kingdom, and China, local
personalized support is always available.