beautypg.com

Atec Pacific-Power-360AMX-AMXT User Manual

1, 2 or 3ø – linear ac power source, The leader in ac power technology

background image

Standard Features:

Advanced Linear Amplifiers Provide Very Low

Voltage Distortion, no Switching Noise, Fast

Voltage and Current Slew Rates, Exceptionally

Low Output Impedance and High Peak

Current Capability

Single or Split phase selectable output from

front panel or bus command

20 to 5,000 Hz. Full Power Bandwidth

Operation – 5Hz to 50KHz small signal

bandwidth, 3dB at 10% of full voltage

Precision Voltage Programming – 0.05% with

Continuous Self-Calibration (CSC) engaged

True-RMS Metering of Volts, Amps, and Power

GPIB (IEEE-488.2) or RS-232 Interface

Waveform Library – Arbitrary Waveform

Generator

Up to 99 Programs with Associated Transients

for Static and Dynamic Test Applications

UPC Studio Software Suite

Available Options:

T-versions include external transformer

assembly for higher voltage ranges

Programmable Output Impedance

Harmonic Analysis and Waveform Synthesis

Peak Inrush Capture and Waveform Analysis

(Available on models with UPC3 controller)

UPC Test Manager Software

Multi Chassis Systems

Higher power systems available by paralleling 2 or

more AMX chassis in Master/Slave configuration.

See AMX Parallelable Models data sheet.

UPC Manager Software Suite

Master the Power of the Wave!

UPC Manager Software

gives you the tools

necessary to quickly

and easily operate your

AC Power Source. With

our graphical interface

control all areas of your

AC Power Source test-

ing with simple presets,

user prompts, test

sequences, test plans

and custom reports.

Models 360AMX-360AMXT

FREQUENCY CONVERSION

R & D

MANUFACTURING

AEROSPACE

MILITARY

CUSTOM

1, 2 or

3Ø – Linear AC Power Source

T H E P O W E R O F E X P E R T I S E

6,000VA

20-5,000 Hz

Model 360AMX

As a member of Pacific Power’s AMX-Series popular family of high performance Linear

AC Power Sources, the 360AMX offers the same low output voltage noise and distortion,

ease of installation, and high AC waveform fidelity as found in all of Pacific Power’s Linear

AC Power Sources. Control and operational features provide a high degree of versatility

and ease of use for applications ranging from simple, manually controlled frequency

conversion to harmonic testing and sophisticated programmable transient simulation.

AC TEST POWER

All 360AMX and 360AMXT models are equipped with a powerful micro-controller with

the ability to operate as a fully integrated test system. This enables a variety of power

conditions and transients to be applied to the device under test while metering and

analyzing all output performance parameters. For higher power requirements, refer to

the AMX Parallelable data sheet for multi-chassis system configuration info.

FREQUENCY/ VOLTAGE CONVERSION

The 360AMX is an excellent source of stable AC Voltage over the frequency range

of 20 to 5,000 Hz (Direct Coupled Range) or 45 to 5,000 Hz (Transformer Coupled

AMXT models) when using the high-end UPC-32 controller. Also available in 1,200

Hz maximum output frequency when using UPC3 or Manual controller. The output

frequency is quartz-crystal stabilized. Output voltages up to 270V

L-N

in single phase

mode and up to 234V

L-L

in split phase mode are available on the 360AMX model and

up to 600V

L-L

in split phase mode on the 360AMXT model.

PHASE CONVERSION

With the ability to provide either single or two phase output, the 360AMX is a good

choice to convert three-phase line voltage into precisely controlled split (two-

phase) or single-phase output power.

UPC SERIES CONTROLLER

Three controller models are available in both manual and programmable control version.

All controllers provide manual operation from the front panel. Programmable Controllers

may be operated from the front panel or from a remote interface via RS 232 or GPIB.

The Leader in AC Power Technology

An early pioneer in the development solid-state power conversion equipment, Pacific

Power Source continues to develop, manufacture, and market both linear and high-

performance PWM AC Power Sources. Pacific Power Source’s reputation as a market and

technology leader is best demonstrated by its continuing investments in both research

and development and world-wide customer support. With corporate owned offices in

the United States, Germany, the United Kingdom, and China, local personalized support

is always available.

1Ш4

2Ш4

3Ш4

0-338V

L-N

0-600V

L-L

0-338V

L-N

/585V

L-L