Atec Pacific-Power-360ASX - Manual

Models 360ASX-360ASXT
FREQUENCY CONVERSION R & D MANUFACTURING AEROSPACE MILITARY CUSTOM
1, 2 , or 3Ø – High Performance AC Power Source
T H E P O W E R O F E X P E R T I S E
Model 360-ASX
As a member of Pacific's ASX-Series family of high performance AC Power Sources,
the 360ASX offers the low acoustic noise, ease of installation, and maximum power
density found in all of Pacific's high frequency, pulse width modulated AC Power
Sources. Control and operational features provide a high degree of versatility and
ease for applications ranging from simple, manually controlled frequency conversion
to harmonic testing and sophisticated bus programmable transient simulation.
AC TEST POWER
The 360-ASX is equipped with a powerful micro-controller with the ability to
operate as a fully integrated test system. It supplies a variety of power conditions
and transients to the device under test while metering and analyzing all output
performance parameters.
FREQUENCY/ VOLTAGE CONVERSION
The 360-ASX is an excellent source of stable AC Voltage over the frequency range
of 15 to 1,200 Hz. The output frequency is quartz-crystal stabilized. Output
voltages up to 600V are available.
PHASE CONVERSION
With the ability to provide single, two, and three-phase outputs, the 360ASX is an
ideal choice to convert three-phase line voltage into precisely controlled split (two-
phase) or single-phase output power.
UPC SERIES CONTROLLER
Three controller models are available offering both manual and programmable
control. All controllers provide manual operation from the front panel.
Programmable Controllers may be operated from the front panel or from a remote
interface via RS 232 or GPIB.
The Leader in AC Power Technology
An early pioneer in the development solid-state power conversion equipment,
Pacific Power Source continues to develop, manufacture, and market both linear
and high-performance PWM AC Power Sources. Pacific's reputation as a market
and technology leader is best demonstrated by its continuing investments in both
research and development and world-wide customer support. With corporate
owned offices in the United States, Germany, the United Kingdom, and China, local
personalized support is always available.
6,000VA
15-1,200 Hz
1Ø4 0-330V
L-N
2Ø4 0-600V
L
1
-L
2
3Ø4 0-330/572V
L-L
Standard Features:
• 1 phase / 3 phase Selectable Output
from front panel or bus command.15 to
1,200 Hz. Operation – 5,000 Hz small
signal bandwidth.
• Precision Voltage Programming – 0.05%
with Continuous Self-Calibration (CSC)
engaged.
• True-RMS metering of volts, amps, and
power.
• GPIB (IEEE-488.2) or RS-232 Interface.
• Waveform Library – Arbitrary Waveform
Generator.
• 99 stored programs with associated
transients for static and dynamic test
applications.
• UPC Studio Software Suite.
• UPC Interactive LabVIEW TM Libraries .
Available options:
• Rack enclosures with caster base.
• Programmable Output Impedance.
• Harmonic Analysis and Waveform
Synthesis.
• Peak Inrush Capture and Waveform
Analysis.
• UPC Test Manager Software Application.
• Wide range of Output transformer
options for world-wide testing.
UPC Manager Software Suite
Master the Power of the Wave!
UPC Manager
Software gives you
the tools necessary
to quickly and eas-
ily operate your AC
Power Source. With
our graphical inter-
face control all areas
of your AC Power
Source testing with
simple presets, user
prompts, test se-
quences, test plans
and custom reports.