Atec Panametrics-35DL - Manual (Page 4)

More than 40 years of experience has
made Panametrics-NDT ultrasonic
thickness gages the most advanced
and best known in the world. The new
pocket-sized 35 gages are no exception.
These practical gages offer more
measurement features and application-
solving capabilities than their renowned
predecessors. All the more reasons for
you to consider the 35 gages for your
precision thickness gage application.
MATERIAL SOUND VELOCITY
MEASUREMENTS
All 35 models have the capability
to make material sound velocity
measurements. This standard feature
is useful in applications where the
speed of the sound within the material
can be correlated to other properties.
Typical applications include cast metals
to monitor the degree of nodularity,
and composites/fiberglass to monitor
variations in density. Olympus NDT offers
a digital caliper for automatic transfer of
measurement thickness.
Velocity measurement mode with direct Velocity
readout
APPLICATION AUTO-RECALL
SIMPLIFIES GAGING
Application Auto-Recall simplifies making
thickness measurements. Select any of
the stored transducers and the 35 gages
recall all relevant internal transducer
parameters.
Stored Standard Setups
Standard setups include most commonly
used transducers.
Stored Custom Setups
Just in case your special application
problem cannot be solved with a
Standard Setup, these gages can create,
store, and recall as many as 20 Custom
Setups (10 with the 35 and 35HP).
REDUCTION RATE
MEASUREMENTS
Differential Mode and Reduction Rate
Mode are standard features on all models.
Differential Mode shows the thickness
variation from a pre-set thickness value.
Reduction Rate calculates and displays
the percent of thickness reduction after
a material thinning process. A typical
application is automotive sheet steel that
is bent and formed to make car body
panels.
You can measure critical thickness metal thinning
caused by bending. Material thinning is displayed as a percentage.
35 SERIES FEATURES
• Velocity and Reduction Rate
measurements are standard on all
models
• Wide thickness range from 0.0030”
to 25.0” (0.08 mm to 635.0 mm)
depending on instrument and material
• Uses contact, delay line, and
immersion transducers
• Application Auto-Recall with default
and custom setups
• Hand-held; weighs only 8.5 oz.
(0.24 kg)
• Min/Max Mode
• Hi-Low alarm
• English and metric display (inches/mm)
• Multi-language user interface
• Long battery life
From simple thickness measurements...