Atec Panametrics-Olympus-PT868 - Manual (Page 3)

Just plug the thickness
transducer cable into the flow
transducer inputs and you are
ready to make wall thickness
measurements. Enter a pipe
material into the TransPort flow-
meter, spread a small amount
of couplant onto the pipe, place
the tip of the transducer on the
pipe surface, and the TransPort
flowmeter automatically displays
the wall thickness. It’s that easy!
O PTIONAL T HERMAL
P
RINTER
A
ND
A
CCESSORIES
.
When you need a permanent
record of your work, live meas-
urements, logged data, and
site parameters can be sent to
a variety of printers by con-
necting the printer directly to
the RS232 serial communica-
tions port of the TransPort flow-
meter. Data can be printed in
tabular “numeric” format or in
graphic “strip chart” format. The
TransPort flowmeter supports the
SEIKO
® Instruments DPU-411
Type II Thermal Printer, EXTECH ®
Instruments MiniSerial Printer 42,
KODAK
® Diconix 150 Plus (with
serial interface option), SYNTEST ®
Corporation SP410 Miniature
Thermal Printer, and EPSON
®
printers or printers with com-
patible command sets.
For your convenience,
the SEIKO ® Instruments DPU-411
printer complete with recharge-
able battery pack, paper, and
printer cable is available directly
from Panametrics. Other avail-
able options include: serial-
parallel converters for use with
parallel printers; 6-ft and 12-ft
cables with the TransPort flow-
meter connector and 25-pin
male “D-style” connector (com-
patible with most printers); 5-roll
packs of thermal paper; and
replacement battery packs for
the DPU-411.
O
PTIONAL
I
NSTRUMENT
D
ATA
M ANAGER TM PC-I NTERFACE
S
OFTWARE
P
ACKAGE
.
Instrument Data Manager (IDM™)
software is a custom package
developed by Panametrics to
link your TransPort flowmeter to
your PC. IDM’s pop-up menus
make it easy to upload site or
calibration data from the flow-
meter for verification or storage.
Stored site and calibration data
can also be downloaded to
one or more flowmeters, thus
eliminating the need to pro-
gram multiple flowmeters. With
IDM, live measurements or
logged data may be viewed or
graphed on your PC monitor
The TransPort flowmeter
with optional pipe wall
thickness gage transducer.
TransPort flowmeter linked to PC with
Instrument Data Manager software.
uid Flowmeter—From Panametrics.