Lss-f02 series – Atec Noiseken-LSS-F02 Series User Manual
Page 2
w w w . n o i s e k e n . c o m
2
Conforming to IEC61000-4-5 ed2 Standard
LSS-F02 series
SURGE OUT
LINE OUT
Isolation transformer
Wooden table
EUT
AC
PE
Surge generator
SURGE OUT
LINE OUT
Isolation transformer
AC
PE
Surge generator
●
A simulator to reproduce “High energy induced lightning noise” which is induced by potential change on the ground, or done
to power lines or telephone lines as result of lightning current.
Dedicated to evaluate performance of electronic equipments which are connected to power lines and telephone lines come
from the outdoors or interconnection lines between buildings and the others or the floors and the other floors whether the
equipments may be malfunctioned, deteriorated or resistible.
Pole transformer
Breaker
To residential
switch-board
Distributing substation
(Power supply lines) Switching noise,
Conducted noise
→
FNS, INS, LSS, VDS series
Light
Exchanger (PBX)
Combined machine
(Copy, fax, scanner)
変圧器
Tester, Production machine, etc.
(3-phase power supply)
Inflow direction of noise
(Communication lines) Switching noise,
Conducted noise
→
FNS, INS, LSS
(* Coupling clamp is necessary)
Inflow direction of noise
Distributing substation
* 3-phase power supply applies to production
machine and large sized tester in factories
→
Applicable simulators are also required for
corresponding to 3-phase EUT
Switch-board
Switch-board
Noise inflow image into a residence
Test setup to consumer appliances
Test setup to electronic components
Test setup to industrial equipments
Test setup to automotive devices
Noise inflow image into a factory
EUT
Surge generator
SURGE OUT
Wooden table
EUT
Protective Safety Box
Capacitor,
varistor,
arrester,
diode, etc.
SURGE OUT
LINE OUT
Isolation transformer
AC
PE
Surge generator