Atec Pacific-Power-AMX Series - Manual (Page 3)

AMX Power Systems
Thermal and Power Factor Rating Curves
THERMAL RATING -AC CURRENT RMS
Short tem overloads to 150% of rated current are permitted. Operating time
before thermal shutdown or circuit breaker trip varies from seconds to several
minutes depending upon line and temperature conditions.
Rated Continuous Load Current as a Function of Ambient
Temperature. Data is shown for combined system configu-
ration.
Refer to 140AMX/140AMXT, 160AMX/160AMXT,
345AMX/345AMXT or 360AMX/360AMXT Data sheets
for specific model Input Power requirements. Note MST
and SLV have same input requirements as respective
standard AMX models.
Power Factor Rating Curves per chasis
Rated Power Factor and Output Voltage at Nominal Input Line. Data is shown for individual MST or SLV chassis. Multiply
Output Current by number of units to obtain total Output Current.
140AMX
360AMX
OUTPUT VOLTAGE – AC VOLTS RMS
Short tem overloads to 150% of rated current are permitted. Operating time before thermal shutdown or circuit breaker trip varies from
seconds to several minutes depending upon line and temperature conditions.
Input Power Requirements (47-63 Hz)
160AMX
345AMX
© 2012 Pacific Power Source, Inc. Specifications subject to change without notice. DS#6AMXMSTSLV1212 Page 3 of 6