Atec Noiseken-ESS-B3011-GT-30R - Manual (Page 6)

0803-05k
Model Description Release
06-00073A CR unit (150pF - 330Ω) for GT-30R TBD
06-00074A CR unit (150pF - 2kΩ) for GT-30R TBD
06-00075A CR unit (330pF - 330kΩ) for GT-30R TBD
06-00076A CR unit (330pF - 2kΩ) for GT-30R TBD
06-00077A CR unit (500pF - 0Ω) for GT-30R TBD
06-00078A CR unit (150pF - 500Ω) for GT-30R TBD
06-00079A CR unit (100pF - 1.5kΩ) for GT-30R TBD
06-00080A CR unit (200pF - 0Ω) for GT-30R TBD
03-00068A Electric field adaptor for GT-30R TBD
03-00069A Magnetic field adaptor for GT-30R TBD
03-00070A Magnetic field loop adaptor for GT-30R TBD
03-00071A Gun head for constant 330Ω test to GT-30R TBD
03-00072A Gun head for constant 2kΩ test to GT-30R TBD
03-00073A Fast rise time adaptor for GT-30R TBD
09-00006A Carry case for GT-30R TBD
03-00074A Conversion adaptor for GT-30R to be fixed with probe stand TBD
Discharge gun holder TBD
Extension cable 3m for discharge gun TBD
13-00004A Infra-red remote controller for ESS-S3011 TBD
12-00007A Discharge tip (conical for GT-30R) TBD
12-00008A Discharge tip (round for GT-30R) TBD
12-00009A Discharge tip (spherical 30mm for GT-30R) TBD
03-00061B Pedestal stand for discharge gun TBD
03-00052B Load resistor mounting board (1.2m X 1.2m) On sale
03-00027A Load resistor mounting board On sale
03-00060A GND cable positioner On sale
06-00001A ESD current target On sale
06-00067A ESD current target On sale
06-00068A ESD target calibration adaptor On sale
00-00010A 6dB attenuator On sale
00-00011A 20dB attenuator On sale
02-00132A High frequency responsible coaxial cable On sale
02-00133A Conversion connector (BNC-SMA) On sale
Model Description Release
03-00039A Test table On sale
03-00004A Insulation sheet On sale
03-00005A Vertical coupling plate (with pedestal) On sale
03-00007A Ground reference plane (3 pcs. to be one set) On sale
03-00020A Horizontal coupling plate (Aluminum) On sale
05-00054B Discharge resistance cable On sale
03-00034A Vertical coupling plate for floor-standing EUT On sale
03-00024A Insulating holder (1.2m X 1.2m) On sale
03-00051A Charge protective mat On sale
01-00013A Automated ESD eliminator On sale
03-00053A Aluminum plate for test On sale
03-00054A Insulating block On sale
03-00066A Insulating support On sale
03-00055A Conductive mat for ISO 10605 compliant test On sale
05-00104A GND cable for ISO 10605 compliant test On sale
03-00065A Coupling plate for ISO 10605 Annex F compliant test On sale
05-00125A ESD elimination brush On sale
05-00052A AUX connector junction box On sale
11-00014A DSUB connector type warning lamp On sale
07-00022A Optical USB module kit On sale
Option
Noise Laboratory Co., Ltd.
1-4-4 Chiyoda, Chuo-ku, Sagamihara City, Kanagawa Pref. 252-0237 Japan
International Sales & Marketing Section
TEL : +81-(0)42-712-2051 / FAX : +81-(0)42-712-2050
E-mail : [email protected]
URL http://www.noiseken.com
* The designs, specifications and products themselves herein are subject to be changed without notice.
Conversion adaptor for
GT-30R to be fixed with probe
stand
Discharge gun holder
CR unit
Gun head
Discharge tips