Atec Noiseken-ESS-B3011-GT-30R - Manual (Page 2)

What values are the charge
capacitor and discharge resistor ?
ESS-S3011
&
GT-30R
ESD Simulator
● “3 pre-checking function” to make sure the more confirmable test
● “CR constant indicator” to make sure the correct unit attachment
● One-touch exchange of gun head and CR unit realized
● “Ten-key & Rotary knob” to ease the setting.
● “Infra-red Remote Controller” to realize the setting remotely from the generator (Standard attached).
● “Discharge Detecting Function” to realize the air-discharge confirmation.
● "Lightest discharge gun in the market" to lighten the continuous operation (Excluding the cable and connector)
● “White LED Irradiator” to facilitate the visualization of the discharging areas.
● “Control Software” to enable the test result reporting and control with PC.
* The software is scheduled to be downloaded freely from our web-site (The connection cable is necessary in addition).
* C (Capacitor) and R (Resistor) for the discharge gun is one-body unit.
* ISO 10605 compliant test can be realized with the optional parts in addition.
Smart model equipped high function & extendibility
EMC test equipment to evaluate the resistibility of electronic equipments
when energy charged on a human body or object is charged to the
electronic equipments.
This can be available for evaluating malfunctions or functions declines of
electronic equipments which are driven by AC/DC against the ESD.
Programmable simulator to ease some complicated tests. The output
voltage is up to 30kV and performable IEC61000-4-2 & ISO 10605 Stan-
dards compliant tests.
● More insurable test realized ! “3 pre-checking function” built-in
[Check 1] Check high voltage output
Confirm error to the set value.
[Check 2] Check withstanding voltage
Confirm whether withstanding voltage is normal or defective
The output and defectiveness are checked upon insertion of the discharge gun
to the attached gun holder.
[Check 3] Check discharge relay operation
Confirm whether the relay is exhausted or still available.
Confirmable by touch of the discharge gun to the check terminal on the
generator and discharge.
Photo of the operation
● “CR constant indicator” to make sure the correct unit attachment.
w w w . n o i s e k e n . c o m
Whether the gun head
corresponds to IEC or ISO ?
Indicated on the display
of the generator
Feature