Atec Noiseken-ESS-B3011-GT-30R - Manual (Page 5)

ESS-B3011 / L1611 & GT-30R
ESD Simulator
● “Pre-checking function” taking the confirmable test into the account
● “CR constant checking function” (No indicator) to make the correct unit
attachment sure"
● “Discharge Detecting Function” to realize the air-discharge confirmation.
● “Lightest Discharge Gun in the market” to lighten the continual operation"
● “White LED Irradiator” to facilitate the visualization of the discharging area.
● One-touch exchange of gun head and CR unit realized
* ISO 10605 compliant test performable with addition of the gun head and CR units (only with ESS-B3011)
Cost-oriented Basic models
Cost-oriented basic model ESD Simulator the light weight discharge
gun attachable.
The output voltage can be selected either max. 30kV (B3011) or max.
16kV (L1611) and compliant to both EN/IEC61000-4-2 Standard (both
B3011 and L1611) and ISO10605 Standard (only B3011).
Specification
Parameter Specification
Moswl ESS-B3011 ESS-L1611
Output voltage 0.20kV~30.0kV±5%（30.5kVmax） 0.20kV~16.5kV±5% (16kVmax)
Polarity Positive / Negative
Repetition cycle 0.05s~9.99s±10%, 0.01s step / Manual
No. of time of discharge 1~999 times, Preset 1 time step or continuous preset
Discharge mode Contact discharge / Air discharge
Trigger mode Gun trigger / Main trigger
Operation panel Indicator : 5X7 Dot matrix LED / Operation : Push buttons (Partially lighting)
Radiation mode select switch Extra / Normal switching function built-in
Discharge detection Discharge detection function in air-discharge equipped.
Pre-checking function High voltage output checking function
(by user operation. Not the calibration but just checking)
CR & Gun head checking CR constant and gun head recognizable (to prevent the wrong combination without indicator)
IEC LEVEL Switching function "Contact discharge mode : 2.0kV, 4.0kV, 6.0kV and 8.0kV step
Air discharge mode : 2.0kV, 4.0kV, 8.0kV and 15.0kV step"
Warning lamp Lighting at voltage output from the generator. Blinking at electro-static discharging
Charge capacitor / resistor 150pF±10%、330Ω±10％ (Built-in CR unit for discharge gun GT-30R）
Charge resistor in generator 10MΩ （Totally 53Ω in combination with 43MΩ in discharge gun）*
Power supply / consumption AC100V∼AC240V ±10% 50Hz／60Hz 62VA
Dimension "Generator : (W)270mm X (H)263mm X (D)200mm
Discharge gun : (W)83.3mm X (H)217.2mm X (D)229.3mm"
Mass Generator : Approx. 4.8kg Discharge gun : Approx. 800g (excluding cable and connector)
* Remote control function not built-in. * The constant depends on combination with CR unit for the discharge gun
Discharge output waveform (IEC Standard)
100%
l Ipeak
90%
10%
lat30ns
a60ns
30ns
60ns
tr=0.8ns±25%
t
w w w . n o i s e k e n . c o m