Atec Noiseken-ESS-B3011-GT-30R - Manual (Page 4)

w w w . n o i s e k e n . c o m
Specification
Parameter Specification
Polarity Positive / Negative
Output voltage 0.20kV∼30.0kV±5%（30.5kVmax）
~10.0kV : 0.01kV step ~30.0kV : 0.1kV step
Repetition cycle 0.05s~99.9s±10% / Manual
Set step : 0.05s (0.05~10.0s), 0.10s (10.0~99.9s)
No. of time of discharge 1~60,000 times, Preset 1 time step or continuous preset
Discharge mode Contact discharge / Air discharge
Radiation level mode NORMAL mode / EXTRA mode
Trigger mode Gun trigger / Main trigger / External trigger
Operation panel Color LCD / Push-buttons (Partially lighting)
Gun holder Standard attached (to hold the discharge gun Model GT-30R)
Radiation mode select switch Extra / Normal switching function built-in
Discharge detection Discharge detection function in air-discharge equipped
Pre-checking function "Following 3 steps function equipped
(by user operation. Not the calibration but just checking)
SETP1： High voltage output checking
STEP2： Withstanding voltage checking
STEP3： Discharge relay operation checking"
CR & Gun head checking CR constant and gun head recognizable
(with an indicator to prevent the wrong combination)
Parameter Specification
"IEC STANDARD" test mode "Contact discharge mode : 2.0kV, 4.0kV, 6.0kV and 8.0kV step
Air discharge mode : 2.0kV, 4.0kV, 8.0kV and 15.0kV step"
"MANUAL" test mode "Contact / Air discharge mode, Arbitrary setting during 0.2kV~30.0kV
Sweeping function built-in, Recordable up to 99 units"
"SEQUENCE" test mode "Enables to operate units set in MANUAL mode continuously.
Max. 22 steps / 1 program and the programs recordable up to 20. "
Warning lamp Lighting at voltage output from the generator. Blinking at electro-static discharging
Charge capacitor / resistor 150pF±10%、330Ω±10％ (Built-in CR unit for discharge gun GT-30R）
Charge resistor in generator 10MΩ （Totally 53Ω in combination with 43MΩ in discharge gun）*
AUX connector D-SUB 15pins female connector
（for connecting to patolight, automated ESD eliminator, external interlock input, external trigger input terminal)
Optical communication connector Optical connector (serial interface) for connecting to PC
Power supply / consumption AC100V∼AC240V 50Hz／60Hz ±10% 75VA
Dimension "Generator : (W)392mm X (H)312mm X (D)295.3mm （including gun holder）
Discharge gun : (W)83.3mm X (H)217.2mm X (D)229.3mm"
Mass Generator : Approx. 7.5kg
Discharge gun : Approx. 800g (excluding cable and connector)
* The constant depends on combination with CR unit for the discharge gun
● Available to conform to ISO 10605 Standard
with addition of the gun head and CR units.
Gun head
for constant 2kΩ test
CR unit Discharge tip
(Spherical 30mm)
Reviewed the past operatability so that more easy and optimal operation can be realized.
In " 1 IEC STANDARD" in MAIN MENU, since the test levels are preset, the test parameters can be set easily
only with selection of the test level. In " 2 MANUAL", voltage and number of times of the test can be selected and
also the set conditions can be recorded. Sweeping discharges can be set as well. In " 3 SEQUENCE", the set
conditions in MANUAL can be recalled for combining them so as to realize the arbitrary sequential tests. In
addition, varied functions like setting for gun trigger, automated ESD eliminator, etc. are equipped.
● High visibility LCD panel and operatability
Available to conform to ISO 10605 Standard by additional purchasing optional gun head and CR units.
Since exchange of the gun head and CR units can be one touched, the tests with varied CR constants can be real-
ized easily.
Options for ISO 10605 Standard compliant test
Model 名称
12-00009A Discharge tip (GT-30R Spherical 30mm)
03-00072A Gun head to GT-30R for constant 2kΩ test
06-00074A CR unit (150pF - 2kΩ) to GT-30R
06-00076A CR unit (330pF - 2kΩ) to GT-30R
06-00075A CR unit (330pF - 330kΩ) to GT-30R