Atec Fluke-1586A - Manual (Page 5)

Fluke Calibration 1586A Super-DAQ Precision Temperature Scanner 5
1586-2586 High-Capacity Module specifications
1586-2588 DAQ-STAQ Multiplexer specifications
General
Maximum input 50 V
Offset voltage <2 μV
3-wire internal resistance mismatch <50 mΩ
Basic CJC accuracy 0.25 °C
General
Maximum input 50 V
Offset voltage <2 μV
3-wire internal resistance mismatch <50 mΩ
Basic CJC accuracy 0.6 °C
LAN Function Control and data transfer
Network protocols Ethernet 10/100, TCP/IP
Command protocol SCPI
RS-232 Connector D-sub 9 pin (DE-9)
Baud rates 1200, 2400, 4800, 9600, 19200, 38400
Function Temperature source control output
Dimensions Height 150 mm
Width 245 mm
Depth 385 mm
Weight 6 kg (typical configuration)
Shipping weight 9.5 kg (typical configuration)
Conformity CE, CSA, IEC 61010 3rd edition
Accuracy specifications generally apply with medium and slow sample rates (unless otherwise noted), after a warm-up
time of 1 hour, and within an environment temperature range of 18 °C to 28 °C, and may depend on the channel.
The confidence level for accuracy specifications is 95 % within one year of calibration.
Measurement specifications
Scan rate Fast 10 channels per second max (0.1 seconds per channel)
Medium 1 channel per second (1 second per channel)
Slow 4 seconds per channel
Display resolution 4 ½ to 6 ½ digits, depending on function and Sample Rate (see Measurement
Characteristics tables below to find the display resolution of temperature readings)
PRT/RTD
Temperature range
−200 °C to 1200 °C (depending on the sensor)
Resistance range 0 Ω to 4 kΩ
Offset compensation 0 Ω to 400 Ω, 4-wire automatic current reversal
400 Ω to 4000 Ω or 3-wire none
Source current reversal interval
(0 Ω to 400 Ω range)
Fast sample rate 2 ms
Medium sample rate 250 ms
Slow sample rate 250 ms
Maximum lead resistance (4-wire Ω) 2.5 % of range per lead for 400 Ω and 4 kΩ ranges.